664820

Suntec Klimatronic ENERGIC plus 9.0 Manual

18
Zoom out
Zoom in
Previous page
1/192
Next page
18
OPERATING PANEL
DESCRIPTION OF FUNCTIONS
1. [POWER]
Press this switch to switch on or off
1. [FUNC]
Press this switch to select between the functions “Cooling”, „Heating“ or „Dehumidity“
2. [TEMP+]
Press this switch in the cooling function in order to set the required room temperature by 1°C respectively
up to a maximum temperature of 30°C.
Press this switch in the heating function in order to set the required room temperature by 1°C respectively
up to a maximum temperature of 25°C
4. [TEMP-]
Press this switch in the cooling function in order to set the required room temperature by 1°C respectively
up to a minimum temperature of 17°C.
Press this switch in the heating function in order to set the required room temperature by 1°C respectively
up to a minimum temperature of 15°C
5. LED-DISPLAY
The display shows the required target temperature in operation.
By pressing the [TEMP+] or [TEMP-] switch, the current ambient temperature is briefly displayed. When
pressing the [TIMER] switch, the number of hours is briefly shown until activation or deactivation. In the
dehumification function, „dH“(or „HP“ upside-down) is shown in the display. Error messages are also
shown in the display.
6. [SPEED]
Press this switch to set the ventilation speed to„LOW“, „MID“ (middle), „HI“ (high) or „AUTO“ (automatic). If
„AUTO" is selected, the ventilator operates at temperature differences larger than 9 degrees at top speed.
If the temperature reduces to a difference smaller than 4 degrees, the ventilator switches to middle blower
position. If the temperature reduces further until the target temperature, the ventilator switches to the
lowest blower position.
7. [TIMER]
Programmable time switch with start and residual time
Starting time: This function is used to switch on the ENERGIC unit automatically when the time entered
has expired. Proceed as follows:
a) Press [TIMER] switch in Stand-by (ENERGIC unit is connected but not in operation), to enter the
required number of hours after which the ENERGIC unit is to start.
b) Select the required function (cooling, heating, dehumification) and set the required temperature.
c) When the set number of hours has expired, theENERGIC unit starts automatically.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suntec Klimatronic ENERGIC plus 9.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suntec Klimatronic ENERGIC plus 9.0 in the language / languages: All languages as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info