501843

Summa SummaSign Pro SL T-series Manual

71
Zoom out
Zoom in
Previous page
1/81
Next page
SummaSign Pro SL D-series Cutters User’s Manual
Operation 3-1
SECTION 3
3 GENERAL INFORMATION
3.1 MAINTENANCE & CLEANING
The SummaSign Pro SL cutters have a number of sliding surfaces made of
smooth metals and plastics. They are virtually friction-free and require no
lubrication. They will, however, collect dust and lint that may affect the
performance of the cutter. Keep the cutter as clean as possible by using a dust
cover. When necessary, clean the unit with a soft cloth dampened with
isopropyl alcohol or mild detergent. Do not use abrasives.
3.1.1 CLEANING THE DRIVE SYSTEM
With time, the sleeves of the drive drum may become clogged with
accumulated residue from the media. This situation may affect traction, as the
media will tend to slip between the pinch rollers and the drive sleeves.
Î To clean the drive sleeves, proceed as follows:
1. First, disable the sensors through the cutter’s control panel or by simply
covering them up (see 2.4.14 Media Sensor).
2. Put the cutter into local operation mode (see Section 2.2.2). Local
operation will allow you to use the control panel’s jogging keys even when
no media is loaded.
3. Remove the backing from a piece of vinyl. Place the vinyl between a
pinch roller and drive sleeve with the tacky side down. Raise the pinch
roller lever to lower the pinch rollers. See Figure 3-1 below.
4. Use the
and jogging keys to move the piece of vinyl back and
forth several times until all residue is removed from the drive sleeves.
5. Lower the pinch roller lever and remove the piece of vinyl.
6. Repeat steps 3 through 5 for the other drive sleeves.
7. Set the cutter's power switch to OFF.
… 71 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Summa SummaSign Pro SL T-series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info