501843

Summa SummaSign Pro SL T-series Manual

73
Zoom out
Zoom in
Previous page
1/81
Next page
SummaSign Pro SL T-series Cutters User’s Manual
Maintenance and Cleaning 3-3
3.1.3 CLEANING THE NOSE PIECE
The nose piece may accumulate residue from the vinyl that will result in poor
cut quality.
Î To clean the nose piece, proceed as follows:
1. Gently remove the knife by turning the knife holder counterclockwise.
2. Observe the orientation of the nose piece and then push it out of its holder.
3. Remove any remaining vinyl residue using a brush or a pair of tweezers.
4. Replace the nose piece.
5. Install the knife as described in section 1.6.
3.1.4 CLEANING THE OPOS SYSTEM
The optical system will collect dust. Therefore, the small hole in the sensor should
be cleaned regularly with a cotton-tipped swab.
Hole
Cutting
Head
OPOS
SYSTEM
FIGURE 3 - 1
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Summa SummaSign Pro SL T-series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info