501843
70
Zoom out
Zoom in
Previous page
1/81
Next page
SummaSign Pro SL D-series Cutters User’s Manual
Operation 2-28
2.6.8 RAM TEST
This test completely checks the RAM bit for bit.
The cutter will not respond when this test is in progress. After this test is complete,
power the cutter off and then back on.
2.6.9 INSTALL MENU
The INSTALL MENU procedure restores the factory-defined menu settings in all
four USER CONFIG menus. This procedure can be performed without a tool or
media.
2.6.10 COIL SETUP
This procedure is used to calibrate the knife and pen pressures, and to set the
knife and pen “landings”.
After calibration, the values are saved in the system’s non-volatile RAM.
A tension gauge of ± 100 gr and ± 500 gr is required to execute this test.
The desired pressure appears in the upper line of the display. The bottom line of
the display indicates the value that has to be sent to the head in order to reach
the desired pressure (this value is between 0 and 127).
2.6.11 LCD CONTRAST
The LCD CONTRAST submenu is used to adjust the contrast (or intensity) of the
liquid crystal display on the control panel.
Press the
or jogging key to increase or decrease the contrast, then press
to apply the new setting.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Summa SummaSign Pro SL T-series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info