750861
14
Zoom out
Zoom in
Previous page
1/28
Next page
10
English
7.1.1 Direct access
To gain direct access to a certain channel simply enter its number with the 0~9 keys on the remote control.
Channel numbers can be up to 4 digits long. Entering numbers and values with less than 4 digits is possible.
Just wait a few seconds and your receiver will switch to the selected channel.
7.1.2 Channel list
Press OK or the LIST button in viewing mode to display the channel list.
Use p q to highlight your channel of choice and press OK to select the highlighted channel for preview. Use
the FAV button to get access to a group of favourite lists. Press OK to select only channels from a particular list.
Refer to chapter 8.2.2 TV Channel Manager to organize channels into favourite lists.
The channel list is equipped with a Channel Filter function to make it easier to find channels. Use RED button
to get access to TV Program List filter. There are 4 options to help to find channel. Use pq to select option.
Use t u to switch between Order option, Clas parameter and Programme list.
Use OK to confirm selection.
ALL for sequential search through complete list of all channels, which are stored in your receiver
from all satellites.
A-Z to search for the channel from the list in alphabetical order. In Group parameter define first
letter of channel name. At right side on screen you will see only channels, which name
starting from selected letter.
FAV to search for the channel within your favourite lists.
SAT to search for the channel by satellites, which channels were stored to receiver.
NOTE: The bottom row on the screen provides technical information of the selected
channel.
The channel list is also equipped with another option to facilitate the search for a channel. Use the GREEN
button to display the search engine and insert the name of the channel you need to find. Use p q and t u
to compose the channel name then press RED button to search or EXIT to select the channel list with the
search results on the left.
7.1.3 Using the CH /CH or pq buttons
CH or p will switch to a higher channel.
CH or q will switch a lower channel.
7.1.4 Using the BACK button
Use the BACK button to return to the last viewed channel. By pressing this button, the receiver displays the TV
recent list. This list contains the last channels viewed. Use p q to select the channel you need then confirm
with OK.
7.2 Volume Control
The volume control allows you to adjust the audio volume. Press V+/ or t u button to adjust the audio
volume. Press the ! button to temporarily mute audio. Press it again to come back to normal volume.
NOTE: The ! function remains set while you switch channels.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT7840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT7840 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT7840

Strong SRT7840 User Manual - Italian - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info