750861
27
Zoom out
Zoom in
Previous page
1/28
Next page
23
English
English
Symptom Cause Remedy
The standby indicator does
not light up
The mains lead is unplugged/
the multipoint connector is
switched off.
Check the mains lead/switch the multipoint
connector on.
There is no image, no sound,
no display
There is no power supply Check the connection cables
There is a short circuit in
coaxial cable
Disconnect device from mains power
supply, eliminate the short circuit in the
coaxial cable or connections, reconnect,
and activate device
Cables are missing or
defective.
Check your connecting cables
A wrong video format was
selected in the OSD settings
Check the settings to make sure your TV
supports the selected format
There are small blocks in the
video, occasionally no sound,
occasionally no signal
The signal is too weak Check for defective cables or connectors.
Alternatively, reduce the coaxial cable
length
Scrambled channel message The channel is scrambled. Select an alternative channel.
No response to remote
control
The receiver is off. Plug in and turn on the plug.
The handset is not aimed
correctly.
Aim the handset at the IR sensor.
The IR sensor is obstructed. Check for obstructions.
The handset batteries are
exhausted.
Replace the handset batteries.
Password forgotten The default password is 0000 Contact the local Service Hotline or send an
email to our support via www.strong.tv
The external USB HDD does
not start.
The power consumption is
too high.
Connect an extra power supply adapter to
your USB HDD device.
The receiver switches to
standby automatically.
The Auto Standby function
is activated and has reached
the set time (default 3 hours).
Set the power down time or disable it in the
SettingsTime Setting menu, parameter Auto
Standby After.
13.0 SPECIFICATIONS
Demodulator
Demodulation: QPSK, 8PSK
Input symbol rate: DVB-S2 8PSK/QPSK: 2 ~ 45 Ms/s
FEC decoder: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 in DVB-S2 QPSK mode
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 in DVB-S2 8PSK mode
Video
Profile level: H.264, H.265, VP9
Max. video resolution: 2160p
Aspect ratio: 4:3 and 16:9
Video resolution: HDMI: 480i/480p, 576i/576p, 720p, 1080i, 1080p, 4Kx2K
SCART: PAL
Audio
Audio decoding: MPEG-1 LAYER 1&2, E-AC-3
Audio mode: Stereo L/R, Dolby® Digital, Dolby® Digital Plus*
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT7840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT7840 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT7840

Strong SRT7840 User Manual - Italian - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info