750861
12
Zoom out
Zoom in
Previous page
1/28
Next page
8
English
3.3 Basic connection using an HDMI cable
Fig. 9
1. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good
quality coaxial cable and suitable ‘F-connector’ plugs.
2. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the
other end to the HDMI input of your TV.
3. Plug the power adapter to a suitable wall outlet.
3.4 Basic connection using a SCART cable
Fig. 9
1. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good
quality coax cable and suitable ‘F-connector’ plugs.
2. Connect one end of a good quality Scart cable to the TV SCART connector on your receiver and
the other end to the SCART input of your TV.
3. Plug the power adapter to a suitable wall outlet.
3.5 Connecting to the Internet
The receiver connects to the Internet through the Internet router or DSL/cable modem in your home network.
It connects to the home network over its Ethernet port or Wi-Fi.
Fig. 10
Connect one end of the Ethernet cable to the receiver and the other end to the LAN port at the router or DSL/
cable modem. To connect the receiver through Wi-Fi, set it during the First Time Installation or select Network
then WiFi Network in the main menu.
3.6 Connection to main power supply
Fig. 10
After all the connections are done you can connect your receiver to power using the supplied external AC/DC
adapter. Now plug the adapter into the wall socket.
4.0 STARTING UP FOR THE FIRST TIME
Once you properly installed and connected all cables of the receiver, setup your receiver step by step by First
Time Installation procedure.
It will guide you through the basic installation and channel searching process.
4.1 Language, audio and video
The receiver turns on displaying the Welcome message, press OK to go to the next step. In this page it is
possible to set Language, Resolution, Aspect Ratio and Audio Format. Press OK to select the option you need to
change then p q to change selection. To confirm and exit press OK.
4.2 PIN code creation
Create and confirm the PIN code, then select AVANTI and confirm with OK to continue.
4.3 Internet Connection
If the Ethernet cable has already been connected, the receiver will display Connesso on Connessione Ethernet, if
not the receiver will display Collega il cavo. In this case connect the Ethernet cable to the Ethernet port and the
receiver will detect the connection automatically.
If you intend to connect the receiver via Wi-Fi connection, select Elenco reti and the receiver will display a list of
all available networks. Select your network by pressing OK and insert the password.
To go to the next step, select Avanti and confirm with OK.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT7840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT7840 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT7840

Strong SRT7840 User Manual - Italian - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info