480577
31
Zoom out
Zoom in
Previous page
1/40
Next page
30 www.strongsat.com
Setup
Changing the antenna configuration
This is the number of LNBs available in your dish installation.
If you change your satellite dish installation, you may need to change this setting so
that your set-top box can tune to all the satellites available.
To change the Antenna Configuration:
1. On the settings menu, highlight ‘Antenna Configuration’, then press
OK.
The Antenna Configuration menu displays.
2. Highlight ‘Number of LNBs’, then press
L or R to select the number of LNBs
you have in your set-up.
3. Highlight ‘LNB index’, then press
L or
R to select the LNB index you want to
change. If you are using a single fixed
LNB, this will be LNB index 1.
4. Highlight ‘Satellite’ then select the
satellite that you want that LNB to
direct towards.
If you are using a single fixed LNB, press L or R to select the satellite that
your LNB is set-up for. Then go to step 6.
If you are using a DiSEqC™ unit*, select the correct satellite for the LNB
connected to each port. LNB Index 1 is associated with port 1, and so on.
5. Repeat steps 3 and 4 to select an LNB index for each of the ports on your
DiSEqC™ unit.
6. To save the changes, press
OK.
7. If you have changed your antenna configuration, you must then check the signal
quality and search for the new channels (see page 31).
Changing the Receiver Number (for SatCR installations)
This is the number (1 to 4) that will be allocated to your set-top box. It is important
that each set-top box in a SatCR installation has a unique number, to avoid conflicting
with other installed set-top boxes.
To change the Receiver Number:
1. On the SatCR LNB menu, highlight
‘Receiver Number Allocation’, then
press OK.
2. Press
L or R to select the Receiver
Number you want.
3. To save the changes, press
OK.
u
u
*DiSEqC™ is a trademark of Eutelsat.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6752 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info