480577
29
Zoom out
Zoom in
Previous page
1/40
Next page
28 www.strongsat.com
Setup
3. Press L or R to change the setting. To change the ‘RF out channel’, press L to
delete the number that is there, then use the number buttons to enter the RF
channel number you want.
4. When you have made all the changes you want to make, press
OK. Or, to
remove the menu without saving any changes, press back.
TV screen format
This is the type of TV you have connected to your set-top box, and how widescreen
broadcast programmes display. Make your choice according to the following table:
Format Type of TV How do widescreen broadcasts display?
4:3 Standard (4:3) The centre portion only of any widescreen
transmissions will display
4:3 Letterbox Standard (4:3) The whole of any widescreen transmissions will
display, but the picture does not fill the screen
16:9 Widescreen (16:9) Full screen
Video signal type
This is the type of signal which is most compatible with your TV. If you have
connected your set-top box to your TV via a SCART lead, choose RGB for a better
quality picture (or, if your TV is S-video compatible, choose YC).
RF out channel
The RF output channel for your set-top box.
The factory preset RF output channel is channel 38. If channel 38 is not compatible
with your TV or VCR, for example if it is already being used as your VCR’s output
channel, or for a terrestrial channel, you may find you cannot tune your equipment to
your set-top box because of interference.
You can therefore use this setting to enter a different number. You may find this easier
if you disconnect your external antenna and/or your VCR from your system while you
make the changes, but if you do so, make sure you follow all the safety advice on pages 6
to 11. You will then need to tune any equipment that is connected to your set-top box
via an RF lead to this new channel number - see the section on RF tuning on page 12.
RF channels may also be known as UHF channels.
For further advice, please call customer support.
Audio compression type
If your set-top box has an digital-optical audio connector, choose ‘AC3’ if you want
your set-top box to automatically output Dolby Digital audio (if available) via this
connector. Otherwise, choose ‘MPEG’.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6752 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info