480577
32
Zoom out
Zoom in
Previous page
1/40
Next page
31
ENGLISH
www.strongsat.com
Setup
Checking the signal quality
You use this screen to confirm that your set-top box is receiving a satellite signal on
all the LNBs/LNB positions available to it.
To check the signal:
1. On the settings menu, highlight ‘Signal Quality’, then press
OK.
The Signal quality screen displays.
The details on the screen show the name
of the satellite, together with bars showing
the strength and quality of the signal being
received from this satellite.
Your set-top box must receive both a signal
strength and a signal quality of about 60%
in order to successfully find channels. That
is, the signal strength and signal quality bars
should both be about two thirds full.
2. Press
L or R to change which LNB index details are displayed.
3. Check that your set-top box is receiving an adequate signal on each LNB index
that is being used.
For example, if you have a single LNB, this will be LNB index 1, but if you are
using a DiSEqC™ unit* to connect to more than one LNB, then each LNB index
is associated with the port of the same number on your DiSEqC™ unit.
4. When you are satisfied that there is an adequate signal, press
back to redisplay
the settings menu.
Searching for channels
Once you have confirmed the satellite signal strength, if you have changed your
Antenna Configuration, you need to search for channels.
To automatically search for Viasat channels:
1. On the settings menu, highlight ‘VIASAT Automatic Scan’, then press
OK.
The VIASAT Automatic Scan screen appears.
2. To start the automatic channel search, press
OK.
A progress screen displays to confirm that the search is taking place.
When the search is complete, a screen displays to tell you the number of TV and
radio channels that your set-top box has found.
3. To confirm these channels and redisplay the settings menu, press
OK.
*DiSEqC™ is a trademark of Eutelsat.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6752 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info