480577
15
Zoom out
Zoom in
Previous page
1/40
Next page
14 www.strongsat.com
Installation
Setting the antenna configuration and choosing a satellite
When you select ‘Manual’, the Antenna Configuration screen appears.
1. Press
L or R to select the number of
LNBs you have in your set-up.
2.
Press D to highlight the ‘LNB Index’ line,
then press L or R to select LNB Index 1.
3. Press D to highlight the ‘Satellite’ line,
then:
u If you are using a single fixed LNB,
press L or R to select the satellite
that your LNB is set-up for. Then
press OK and continue to the
section ‘Checking the signal and searching for channels’.
u If you are using a DiSEqC™ unit*, select the satellite for the LNB connected
to port 1.
4. Press
U to highlight the ‘LNB Index’ line, then press R to select LNB Index 2.
5. Repeat steps 3 to 4 to select an LNB Index for each of the ports on your
DiSEqC™ unit. Then press
OK and continue to the section ‘Checking the signal
and searching for channels’.
Checking the signal and searching for channels
The Signal quality screen is now displayed. You use this screen to confirm that your
set-top box is receiving a satellite signal.
The details on the screen show the name
of the satellite, together with bars showing
the strength and quality of the signal being
received from this satellite.
Your set-top box must receive both a signal
strength and a signal quality of about 60% in
order to successfully find channels.
Follow the instructions for ‘Automatic set-up’
or ‘Manual set-up’ on page 15, depending on
which set-up you have chosen.
*DiSEqC™ is a trademark of Eutelsat.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6752 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info