480577
16
Zoom out
Zoom in
Previous page
1/40
Next page
15
ENGLISH
www.strongsat.com
Automatic set-up
Your set-top box is preset in the factory with the correct LNB settings to receive
signals from up to two satellites.
1. Press
L or R to change which LNB index details are displayed.
2. Check that your set-top box is receiving an adequate signal according to the
table below.
If you have.... Check for adequate signal strength and
quality on...
A single, fixed, universal LNB Index 2, Sirius
Two, fixed, universal LNBs Index 2, Sirius
and Index 1, Thor
If there is no signal, check your installation. Check all the connections are properly
made. See also the section ‘Solving problems’ on page 34.
3. When you are satisfied that there is an adequate signal, press
OK.
The Viasat Automatic Scan screen appears.
4. To start the channel search, press
OK.
A progress screen displays to confirm that the search is taking place.
When the search is complete, a screen displays to tell you the number of TV and
radio channels that your set-top box has found.
5. To confirm these channels and display the next screen, press
OK. Then see
‘Activating your subscription’ on page 16.
Manual set-up
1. Press
L or R to change which LNB index details are displayed.
2. Check that your set-top box is receiving an adequate signal on the satellites that
you selected for each LNB index.
If there is no signal, check your installation. Check all the connections are properly
made. See also the section ‘Solving problems’ on page 34.
3. When you are satisfied that there is an adequate signal, press
OK. The Manual
Scan screen appears.
The ‘Satellite’ line shows the satellite you
selected as LNB index 1, and the details below
show the search settings for that satellite.
If you have more that one LNB, you can view
the details for each satellite by highlighting the
‘Satellite’ line then pressing L or R.
Installation
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6752 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info