480561
14
Zoom out
Zoom in
Previous page
1/21
Next page
11
Українська
Auto Search
After selecting this menu item and pressing the OK, the receiver will perform an automatic search for a
channels at all frequencies and update the channel list. During search process the receiver will display
the progress of the search, the current frequency and name of found TV and Radio channels. At the
end of the auto search the receiver will propose to exit menu to view mode or return back to Channel
search menu.
Manual Search
Using this mode you can search for channels on a particular frequency channel. This function requires
knowledge of the parameters of broadcast in your area.
Indicators of signal level and quality will help you make sure you have a signal on the selected frequency,
as well as to adjust the antenna, if necessary.
After you select manual search and other necessary parameters, press OK. The receiver will search for
channels and install them in the case of broadcast with the specified parameters is available.
NOTE: If at the end of the search the receiver did not install any channels
it is possible that your antenna is not correctly installed. To ensure
good results and the proper antenna configuration, refer to
qualified professionals.
6.2.2 Video setting
In this menu you can set the output parameters of the receiver according to a connected TV.
TV Ratio: Set in accordance with an aspect ratio of the connected TV (4:3 or 16:9)
Conversion: Set preferred aspect ratio conversion.
If connected to a TV with 4:3 aspect ratio, the most appropriate mode
will be 4:3 Letter Box. In this mode, the video in 4:3 format will not be
converted and 16:9 video format will be converted so as to display it
in full and without geometric distortion (the top and bottom of the
screen will appear black horizontal stripes).
If connected to a TV with a 16:9 aspect ratio, the most appropriate
mode will be 16:9 Pillar Box. In this mode, the video 4:3 will be shown
without geometric transformations (but on the left and right of the
image will appear black vertical bars) and 16:9 video format will be
displayed without transformation, and occupy the entire screen.
Experiment with this setting and find the option that best suits you.
Do not forget about the possibility of control the format of the menu
of your TV (depending on the model of your TV).
HDMI Resolution: allows you to change the resolution output HDMI. If the connected TV
does not support the new set point, then you will see a black screen.
In this case, wait for 10-15 seconds without pressing any button
on the remote control of receiver, and the previous value will be
returned automatically.
6.2.3 System Settings
In this menu you can set the preferred language for menus, audio and subtitle.
OSD Language: set according to your preferences.
Audio Language: Digital TV allows the operator to transmit more than one audio track.
If the operator carries multiple tracks of audio, then the receiver will
automatically select the appropriate audio track to your preferences.
Subtitle Language: Digital TV allows the operator to transfer the subtitles on one or more
languages. Select your preferred subtitle language and the receiver
will automatically display the subtitles in that language (in the case of
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8502 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info