480561

Strong SRT 8502 Manual

16
Zoom out
Zoom in
Previous page
1/21
Next page
13
Українська
Current Date: Select the current date in the submenu that opens after you click OK.
This option is available, if Auto time setting is set to Off.
Current Time: set the current time using the number buttons. This option is available,
if Auto time setting is set to Off.
Auto channel update: if set to On the receiver will update the channel settings in the standby
mode. Upon detection of new channels on the air receiver will offer to
add them to the list of channels. Click OK. To save the changes.
Auto stand-by: This feature allows you to set the time period over which the receiver
automatically switches to standby if during this period, the receiver
did not receive any commands. You can refuse to use this feature by
setting the Off, for example, to activate the receiver or replace the
software by aerial signal. Also, you can change the auto disconnection
from 1 to 12 hours.
6.3.2 Set Timer
The timer function allows you to adjust the receiver on and off on schedule. Setting the timer from the TV
Guide is the most convenient solution, however, you can set timers manually.
In the menu Timer to select the submenu Set the timer. After clicking OK appears on the screen list of
timers, which displays a summary of the configured timers: number, channel name, date, start and end
times, repeating timer, and his status.
NOTE: if there are no timers are configured, then the timer list will be empty.
You can add, change or delete the timer.
To add a timer, press RED button. In the menu that appears, set the timer, the required parameters:
Channel: To select a channel, press OK in the proposed list, select a channel
and press OK to confirm. The name of this channel will appear in the
options Channel:
Loop: select a repeat of the cycle timer. Once - the timer will be executed
once, after which it will be removed from the list of timers.Daily - the
timer will run at a specified time each day. Weekly - the timer will run
once a week at this time. In this day of the week will match the day of
the week the date specified in the date.
Date: Enter the date when the timer should enable the receiver.The date
format "day / month / year."
Time: Enter the time, turn the receiver on a timer.
Duration: Enter the time during which you wish to make viewing the
program timer.
Activate, select Yes to activate the timer
After pressing the EXIT on the list of displayed timers installed a timer is added to the list of timers
Upon occurrence of the start of the timer unit will operate according to the current regime:
If the receiver is turned on, then 10 seconds before the start of the timer unit will notify you of
an event timer. You can take the timer by pressing the OK, or to abandon the timer by pressing
the EXIT. At the end of the timer unit will be switched to the channel you viewed before
the timer.
If the receiver is in standby mode, it automatically turns on and off at set times.
To edit a timer, buttons pq note marker in the list of timer that you want to edit and press OK button
on the remote.In the menu, timer, make the necessary changes and press the EXIT. All changes will be
saved in the timer list.
To remove the timer, buttons pq note marker in the list of timer that you want to delete and press
BLUE button on the remote. This timer will be removed from the list of timers.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8502 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info