480561
8
Zoom out
Zoom in
Previous page
1/21
Next page
5
Українська
3.0 CONNECTING THE RECEIVER
Before you make any connection to the receiver to other devices or equipment, make sure that the
receiver is connected to all attached devices are disconnected from their sources of supply.
3.1 Connecting the antenna
Connect the cable from the terrestrial antenna (internal or external) to the ANT IN connector located on
the rear panel of the receiver. This connector marked as “АНТ ВХІД”.
3.2 Connecting to TV
This receiver can be connected to a TV in one of two ways.
1. With the cable 3RCA-3RCA (included).
Connect the cable from one side to the terminals (outputs) of the receiver, on the other
hand, to the connectors (inputs) of TV set. The connection should be done in accordance
with the color-coded connectors.
2. With cable HDMI (not included)
Connect one side of the cable to the connector on the receiver. The second side of the cable
to the appropriate connector on the TV.
Fig.6
3.3 Connecting to a digital audio amplifier.
Connect the (output) S / PDIF receiver to the appropriate connector (input) digital audio amplifier.
Fig.6
3.4 Connecting an external USB drive.
Make sure the plug-in USB drive consumes less than 500 mA. If your hard drive consumes more than
this value, use an external power supply for the USB drive. If you use a USB flash drive with an external
power source, you must first connect a USB storage device to a power source, then connect the drive to
the receiver.
Fig.7
4.0 THE FIRST INSTALLATION
After completing all the necessary connections, turn on the TV. Check the connection of the receiver to
the TV and the wall outlet, turn on the receiver. Wait for the menu on the TV screen „Installation wizard“.
You should do the necessary settings.
OSD Language: Use the tu, select the OSD language.
Country: displayed for information
Subtitle Display: Use the tu to enable / disable subtitles.
Press BLUE button to move to the next screen.
Aspect Ratio: Using the buttons tu, select the aspect ratio depending on the
connected TV 4:3 or 16:9.
Conversion: Use buttons tu, to change aspect conversion.
HDMI Resolution: Use the tu, select the resolution according to the characteristics of
the connected TV.
After pressing the BLUE button on the remote you get to the next window Channel Search, which will
allow you to adjust the antenna for good reception of signals and to scan channels.
In this menu:
Channel: select a frequency channel, which is being broadcast in the region
where you live.
Adjust the antenna so as to achieve the best indicators of level and
quality of the signal displayed on the screen.
Frequency (MHz) shows the frequency of the selected channel,
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8502 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info