751655
23
Zoom out
Zoom in
Previous page
1/31
Next page
Other options
At the bottom of the screen there are some commands (color buttons) to make changes to satellites
or transponders (use INFO button to choose between Satellite and Transponder
Add Press RED button to add a new Satellite/Transponder.
Edit Press GREEN button to modify the value of the Satellite/Transponder.
Delete Press YELLOW button to delete one Satellite/Transponder.
Scan Press BLUE button to start the scan.
7.3.2 Terrestrial Channel Search
To access the terrestrial channel search press MENU and use t u to select Channel Search. Then use
pq to select Terrestrial Channel Search and press OK. To access this menu it is necessary to insert the
PIN code set during the first installation.
Auto Search This menu allows you to search for channels from all available frequencies
for your selected region automatically. Be aware that all previous installed
channels and favourite list(s) will be deleted. The new-found channels will be
installed in the channel list and afterwards you can create a new favourite list
if you like. Press OK to access the menu, with t u select Yes to start the scan
or No to back in view mode without scan.
Manual Search Select a particular channel to do a search on just one (known) frequency.
Press OK to access the sub-menu and use t u to select the channel to be
scanned, then press OK to start the scan. The signal quality bar might be
useful to check if the frequency is indeed in use.
Country Select the correct country where this receiver is used. If failing to do so, may
result in that channels appear randomly in the channel list, instead of a more
logical order.
Antenna Power Set to On if you use an active antenna. When set to On, 5 V will be present at
the RF in connector of the receiver. Select Off for passive antennas.
7.4 Time
Set up your time zone for clock/time in your menu and system.
Time Offset The GMT time can automatically be determined from the incoming TV
broadcast if set to Auto. The time zone is determined from the Country
setting in the Channel Search menu. If set to Manual, you can change the
Time zone yourself in the Time Zone option. Default is Auto.
Time Zone If the correct time cannot be obtained from the incoming TV broadcast,
change the Time Zone setting yourself.
Example: in case of Daylight Saving Time.
Sleep As a power saving feature, the unit will switch to Standby automatically, if no
command from the remote control is received for the set time. Options are 1
Hour up to 12 Hour and Off. Default is 3 hours.
Power On/Off You can set a time to automatically switch On and/or Off the unit every day.
The unit will start on the last watched channel.
Note: Set Auto Standby function to Off.
Power On Set to Enable if you want to use the automatically switch On function.
Power On Time Enter the switch On time with the numeric buttons on the remote control.
Power Off Set to Enable if you want to use the automatically switch Off function.
19
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8221 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8221

Strong SRT 8221 User Manual - German - 37 pages

Strong SRT 8221 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info