751655
21
Zoom out
Zoom in
Previous page
1/31
Next page
LNB Power Use pq to select the LNB power and t u to modify the setting. 13/18V is
the setting for a Universal LNB.
22 KHz Use t u to switch the 22KHz oscillator signal on or off. Auto is the setting for
a Universal LNB.
DiSEqC1.0/1.1 DiSEqC1.0 to select the correct port from up to 4 (if available) for the
corresponding LNB. DiSEqC1.1 to select the correct port from up to 16 (if
available) for the corresponding LNB.
Motor If using a motor driven dish, press t u to choose between DiSEqC1.2 and
DiSEqC 1.3 depending on the motor type you use.
DiSEqC 1.2
DiSEqC 1.2 is a protocol for motor-driven dishes, the dish/motor-combination itself needs to be
aligned due South (North for Southern hemisphere) at its reference position at 0°. It is possible to
manually search and store every satellite individually.
Refer to the manual of your motor-drive for more detailed information. Modern motor drives have
usually also the capability of the enhanced DiSEqC 1.3 protocol, which would be preferred, since it
can find satellite positions automatically, relative to a geographical location.
Move the motor to the right position for locking the signal like explained below.
Use t u to select DiSEqC 1.2, then press OK to enter the submenu.
Move Auto: Press t u for moving West/East. Press the opposite t u to stop moving.
Move Continue: Press t u for moving West/East. Press the opposite t u to stop moving.
Move Step(1): Press t u for moving West/East in 0.3° step.
Store Position: To store the current motor position for selected satellite. Press u and OK to
confirm.
Goto Position: To move the dish to the last position stored. Press u and OK to confirm.
Goto Reference: To move the dish to the 0.0° position. Press u and OK to confirm.
NOTE: In the case that your Satellite Dish is obstructed in the movement towards
West or East, see the chapter Set limit here below.
DiSEqC 1.3
DiSEqC 1.3 (also known as GotoX) is an automated system for finding satellites with a motor driven
dish. It is an enhancement of the DiSEqC 1.2 protocol, where it was still needed to manually search
and store every satellite individually. With DiSEqC 1.3 every satellite position is automatically
calculated for a defined geographical location on earth. Only this location is needed to be entered
and stored in to the box, in conjunction with a DiSEqC 1.3 capable motor drive, all (pre-installed)
satellites can easily be found. The dish/motor-combination itself needs to be aligned due South
(North for Southern hemisphere) at its reference position at 0°. Refer to the manual of your motor-
drive for more detailed information.
Select DiSEqC 1.3 with the t u buttons. Press the GREEN button to setup your location coordinates.
A pop-up window will appear, in which the following settings can be made:
Location: Use t u to select Manual to set your own position by using the below
instruction. This option contain also a list of cities with preset coordinates.
Other options: Longitude Direction: Choose East or West.
Longitude Angle: Use the 0 ~ 9 buttons to enter the coordinate.
17
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8221 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8221

Strong SRT 8221 User Manual - German - 37 pages

Strong SRT 8221 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info