480565
15
Zoom out
Zoom in
Previous page
1/23
Next page
12
Screen Mode: Use t/u to adjust this setting in accordance with the aspect ratio of your TV
set (4:3 or 16:9) and the preferred conversion. Options are: Auto (automatic
detection of aspect ratio), 4:3 Panscan (displays 16:9 broadcasts full screen and
cut upper and lower parts of 16:9 video on your 4:3 TV), 4:3 letterbox (displays
16:9 widescreen broadcasts with black bars on top and under the picture on a
4:3 TV). For a modern 16:9 TV set following options can be set: 16:9 Wide Screen,
16:9 PillarBox (4:3 broadcasts will be shown with black vertical bars on the left
and right side of the image) and 16:9 Pan&Scan. We recommend trying these
settings in order to find the option that suits you best. Do not forget about the
possibility to control the TV format via the menu of your TV set.
HDMI Output: Allows you to change the resolution of the HDMI output. If the connected TV
does not support the newly set resolution, then you will see a black screen. In
this case, wait for 10-15 seconds without pressing any button on the remote
control of the receiver, and the previous value will be recovered automatically.
Loop out in stand-by: This allows to by-pass the antenna signal to the ANT OUT connector, where
you may have an additional TV set/receiver connected, in order to receive
analogue/digital broadcasts there too.
Digital audio: Use t/u to adjust this setting in accordance to the used audio equipment. To
loop the digital audio through HDMI or S/PDIF to a connected amplifier, home
theatre or other equipment able to decode AAC and AC3, set RAW HDMI ON.
If neither your TV set nor any other connected audio equipment supports
decoding of AAC and AC3, set RAW HDMI OFF.
6.3.3 Time Setting
This menu allows you to specify the method for synchronising of date and time and you can set the
duration for displaying the information banner.
Time Offset: Use t/u to choose Auto to automatically synchronise time and time zone with
the broadcast, or Manual, to specify the time zone manually.
Region: Use t/u to set your specific country.
Time Zone: This setting is only available when the Time Offset is set to Manual. You can
use t/u to set the time zone, if the automatic settings in your region are not
supported by the broadcast.
Summer Time: Use t/u to select On or Off according to your local season.
Banner Time OUT: Use t/u to choose between the available settings: 3s, 4s, 5s, 6s, 7s, 8s, 9s and 10s.
6.3.4 Auto Standby
Auto Standby is a new feature that helps you reduce power consumption. When Activation is set to On,
the receiver will switch to standby if it doesn’t receive any commands for three hours. Set Auto Standby to
Off to deactivate this function. When the setting is On you can set the Duration Before Standby: Available
settings are: 1 Hour - 12 Hours with steps of one hour.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8200 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info