480565

Strong SRT 8200 Manual

13
Zoom out
Zoom in
Previous page
1/23
Next page
10
Delete To delete a channel use the p/q buttons to select the channel, then press the
BLUE button. Now you’ll be asked if you want to delete this channel. Press OK
to confirm or EXIT to cancel. The channel(s) you delete from the channel list
will be removed permanently, also if this channel is part of the favourite list.
Add channel to favourite lists
To add a channel to a favourite group, use the p/q buttons to select the
channel, then press the FAV button. Now the favourite group selection will
be displayed. Select the group to which the channel should be added with
p/q and press OK. The selected channel will be marked with the v symbol.
Additionally you can also select another favourite group where to add this
channel. To do so, press OK at the other group as well. When you have added
this channel to the desired group(s), press EXIT to go back to the channel list.
There you can proceed like this to add other channels to favourite groups.
You can also remove a channel from a favourite group by pressing the FAV
button again and selecting the group it is part of. Then press OK to remove the
symbol and the channel will be removed from this (these) favourite group(s).
6.1.2 Channel Sort
This menu allows you to sort channels by the following methods:
By LCN: The channels will be sorted according to the LCN (Logical Channel Numbering)
system, which may be broadcasted in your area. If the operator doesn’t support
LCN your channel numbers will start by channel number 800, otherwise the LCN
channels will be sorted in regional order starting with 1. None LCN channels can be
found again starting with number 800. Further the LCN method will allow you to
save the strongest channels broadcasted in your area, only.
By Service Name: The channels will be sorted in alphabetical order.
By Frequency: The channels will be sorted in ascending order of the frequency on which they
are broadcasted.
By Operator: The channels will be sorted by the operator ID.
6.1.3 Delete All
Use this menu carefully! It will delete all of the stored channels and settings! To execute this function it
will be requested to enter the PIN code DEFAULT PIN: 0000. After you have performed this action you
will be guided to the Installation Guide again!
WARNING: The Delete all function will permanently delete all of the stored channels and settings
from your receiver!
6.2 Channel search
Within the menu Channel Search you can adjust your search settings and perform an automatic or
manual channel search. Press MENU and use t/u to select Channel Search, then press OK. You will see
the following submenus displayed: Search Setup, Auto Search and Manual Search.
Use p/q to select a submenu and press OK or u to access.
6.2.1 Search Setup
In the menu Search setup you can set the Antenna Power and the country in which you live.
Country: Use the t/u buttons to change the country.
Antenna Power: If you use an antenna which can be amplified (i.e. an active indoor/outdoor
antenna) and it requires a voltage of 5 V and doesn’t consume more than
50 mA, then you can set the Antenna power to On. If you use an antenna
without an amplifier or your antenna is already amplified by an external power
supply or if you are using an antenna from a house distribution system, please
keep Antenna power Off.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8200 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info