480565
12
Zoom out
Zoom in
Previous page
1/23
Next page
9
English
5.7 Using external USB storage devices
We strongly recommend you to carefully read and follow the specified points mentioned in chapter 1.5
Usage of external USB devices!
Further please consider these points whilst using your receiver with an external USB storage device:
Before you disconnect the USB device from the receiver, we recommend using the Remove the
USB device function which is available in several menus of your receiver. If you have removed
the USB device unintentionally, then please connect it again.
Well functioning multimedia playback is highly depending on the data rate supported by
the connected USB device. Especially for playback of video files and loading high resolution
pictures, a reading speed of min. 10 - 15 Mbit/sec is required. As high data rates are not
supported by all types of USB devices it is necessary to ensure that the used USB device can
fulfil this requirement. Mostly such data can be found at the website or specification sheet of
the USB device manufacturer.
6.0 MAIN MENU
The main menu gives you access to specific settings and multimedia functions. To access the main menu,
press MENU in viewing mode. The main menu consists of the following sub menus: Program Organizer,
Channel Search, System Setup, Tools and Multimedia.
Use EXIT in the main menu to get back to the previous menu.
6.1 Programme Organizer
Press MENU and use t/u to select the Program Organizer and press OK.
You will see the following submenus displayed: Channel Manager, Channel Sort and Delete all.
Use p/q to select a submenu and press OK or u to access.
6.1.1 Channel Manager
The channel manager allows you to move, skip, lock, delete and add channels to the favourite list. To
access this menu you will need to enter your PIN code DEFAULT PIN: 0000.
Now your TV channel list will be shown. To switch between the TV and radio list use t/u. To navigate
within the list, use the p/q buttons.
Move To move a channel to a new position, use the p/q buttons to select the
channel, then press the RED button. Now next to the channel’s name the
symbol is displayed. This indicates that this channel can be moved to another
position. To do so, use the p/q buttons to move it to the desired position and
press OK to confirm. Proceed like this for any other channels you wish to move.
You can also correct the channel selection for moving when you press the RED
button again.
Skip To skip a channel while switching through the channel list, use the p/q
buttons to select the channel, then press the GREEN button. Now next to the
channel’s name the symbol will be displayed. After that, channels marked
with will be ignored when switching through channels in the viewing
mode. Proceed like this for any other channels you wish to skip. You can
also correct the channel selection when you press the GREEN button again.
Channels marked for skipping will stay accessible within the channel list.
Lock To lock a channel in the channel list, use the p/q buttons to select the
channel, then press the YELLOW button. Now next to the channel’s name the
symbol will be displayed. After that channels marked with will request
entering of the PIN code DEFAULT PIN: 0000 when switching to it. Proceed
like this for any other channels you wish to lock. You can also correct the
channel lock when you press the YELLOW button again.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8200 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info