568531
10
Zoom out
Zoom in
Previous page
1/17
Next page
7
PART 1 • English
English
function. The default LCN setting is made by the country setting. The default setting can be overruled in this
menu, by setting the LCN Mode on/o.
6.0 TIME
6.1 Time mainmenu
The time menu allows you to set GMT Usage, Time Zone, Date, Time, SleepTime, Summer Time and AdvTimer. Press
MENU to enter the Main menu and tu to highlight Time, then press q to enter the Time menu. Press pq to
highlight the desired item and press OK to enter the sub-menu. Press EXIT toexit.
GMT Usage: This menu is used to select the usage of GMT. The options are: OFF/ON. Default is ON, the
GMT time is set by the broadcaster’snetwork.
Time Zone: This menu is valid only when selected ON” in GMT Usage menu. The Time Zone range is
“-12:00 ~ +12:00”, increasing half hour progressively. Default time zones are according to
the country setting in the Installation menu, but can be overruled here. The default time
setting is best leftunchanged.
Set Date: This menu is valid only when “OFF” is selected in GMT Usage. Press the0~9 buttons to input
thedate.
Set Time: This menu is valid only when OFF” is selected in GMT Usage. Press the 0~9 buttons to
input thetime.
Sleep Time: This menu allows you to set the Sleep Time. The options are OFF/60/120/180 minutes. After
this time has passed the unit enters tostandby.
Summer Time: Daylight Saving Time. This menu allows you to set the Summer Time. The options are
OFF/ON. If GMT Usage was set to ON”, then the broadcaster will control the switch to
Summertime.
Adv Timer: This menu allows you to set the Advanced Recorder Schedule Mode. When in the Timer
window, press OK to add a timed event. Use the navigation buttons, to set the channel
type and number, start and end time, mode, timermode.
Once: one timeprogramming
Weekly: Every week, same day, same time, samechannel.
Weekend day: Every Saturday and Sunday, same time, samechannel.
Weekday: Every Mon, Tue, Wed, Thu, Friday: same time, samechannel.
Daily: Every day, same time, samechannel.
A timer event can be removed with the REDbutton.
NOTE: To make a recording a USB device must be connected and the timer mode must be set to
‘Recorder’, otherwise the unit will only wake up on the channel set, but notrecord.
7.0 TVSETUP
7.1 TV setup mainmenu
The TV setup menu allows you to set TV Format, TVMode, Video Output, TV Resolution, OSD Transparency and
Banner Display Time. Press MENU to enter the Main menu and tu to highlight TV Setup, then press q to enter the
TV Setup menu. Press pq to highlight the desired item and press OK to enter the sub-menu. Press EXIT toexit.
TV Format: 4:3PSPan&Scan: When a 4:3 TV should be connected, a 16:9 broadcast will be shown as a
centre cut-out, losing image content on the left and theright.
16:9LB Letterbox: When a widescreen TV is connected, a 4:3 broadcast will be shown with black bars left
andright.
16:9FIT: When a widescreen TV is connected, a 4:3 broadcast will be shown stretched from left
toright.
4:3LB Letterbox: When a 4:3 TV should be connected, a 16:9 broadcast will be shown with black bars above
and below, but not losing imagecontent.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 80 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info