568531
8
Zoom out
Zoom in
Previous page
1/17
Next page
5
PART 1 • English
English
NOTE: The correct country setting is required to select the corresponding scan process in use for
that particular country. After the channel search you can change (additional) settings in the
menu, as described in thischapter.
Throughout the menu use the navigation buttons pqtu to select Highlight and change settings. Press OK to
conrm if a change is made. Press EXIT to exit the menu or press MENU to go one stepback.
4.2 Installation
Press MENU to enter the Main menu. Press tu to highlight Installation, then press q to enter the Installation
menu. Press pq to highlight the desired item and press OK to enter the sub-menu. Press EXIT to exit or press
MENU to return one stepback.
Antenna Power: ON/OFF. If an active (indoor-) antenna is used which requires 5 V power supply (check its
manual), you can switch it on here. If no 5 V is needed, this option is best leftO.
Country Setting: This menu is used for changing the country setting. The correct country setting is required
to select the corresponding scan process in use for that particularcountry.
Auto Scan: Select Auto Scan, then press OK, a warning window appears. Select O and you will clear
the database and enter the AutoScan overview. Select X to go one step back. Wait until the
auto scan iscompleted.
Manual Scan: If you want to (re-) scan a single channel multiplex and you know its properties, you can
do a manual scan. Select Manual Scan and press OK to enter the ManualScan menu. Press
pqtu to set Channel No., Frequency andBandwidth, then press OK to start channelscan.
Standby RF Loop: ON/OFF. The unit provides a loop through of the antenna signal, so a second unit/TV can
use the same antenna simultaneously. You can switch this feature OFF, if not required, to
save power in standbymode.
5.0 OPERATION
5.1 ChangingChannels
There are three ways of channel selection:
stepping through the channel list, selection by number and from the on-screen
channellist.
Stepping through the channel list:
To move through the channel list, press pq on the remotecontrol.
Selected by number: Enter the channel number directly by pressing the 0~9 buttons, and then press OK to
select a channel (or wait a second after pressing numbers).
Selected by on-screen channels list:
You can also select the required channel directly from the on-screen channel list. Press OK
to get the programme list on screen and use pq and OK to select a channel. Use PG+ or
PG to jump 15 places in the list. The highlighted channel will be visible in thebackground.
5.2 Accessing the Electronic Programme Guide (EPG) with
EPGbutton
To access the EPG of all channels, press EPG to enter the EPG menu*. Press pq to select a channel. Press u to
switch to the events schedule of the selected channel. Press the YELLOW button to book a timer of theevent.
With the BLUE button you can switch to the top line and use tu to select the FAV list you want tosee.
Use BLUE again to switch to the EPGwindow.
When in the right window, use tu to select anotherdate.
Use PG+ or PG to jump quickly in thelists.
Use MENU to return to leftwindow.
Use EXIT to leave the EPG.
Pressing OK will switch to the highlightedchannel
*Availability depends onbroadcaster.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 80 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info