480571
8
Zoom out
Zoom in
Previous page
1/25
Next page
5
PART 2 • English
English
15. GREEN For Teletext function, in OSD for specific functions.
16. YELLOW For Teletext function, in OSD for specific functions.
17. BLUE In viewing mode opens the EPG overview, for Teletext and in OSD for
specific functions
18. pq Scrolls channel and EPG information up/down in viewing mode, in
OSD for navigation.
19. tu In OSD for navigation
20. OK In viewing mode displays the channel list, in Menu mode activation/
confirmation of the specific item
21. MENU Opens the menu in viewing mode, within menu you can directly exit to
viewing mode
22. EXIT In viewing mode removes appearing messages /Info banner, in OSD
one step back or cancel actions
23. TV/RAD Toggles between TV and Radio mode
24. ASPECT Show information about the screen format in broadcast.
25. HISTORY Displays the last watched channels list in viewing mode including
EPG information
26. SIGNAL Display signal and quality of satellite signal from current selected
satellite and channel
27. 5 Fast rewind
28. 1 PLAY / Opens the playback list in viewing mode
29. 3 Stop
30. 6 Fast forward
31. 2 In viewing mode starts Timeshift, in Multimedia for Pause function
32. 4 Starts recording of the actual broadcast
33. F1~F4 No function
3.0 CONNECTIONS
3.1 Basic connection using a Scart cable
Fig. 4.
1. Connect the LNB of your satellite dish to the SAT IN connector of your receiver using a good
quality coax cable and suitable ‘F-connector’ plugs.
2. Connect one end of a good quality Scart cable to the TV SCART connector on your receiver
and the other end to the SCART input of your TV.
3. Plug the power adapter & cord to a suitable wall outlet.
3.2 Basic connection using an HDMI cable
Fig. 5.
1. Connect the LNB of your satellite dish to the SAT IN connector of your receiver using a good
quality coax cable and suitable ‘F-connector’ plugs.
2. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and
the other end to the HDMI input of your TV.
3. Plug the power adapter & cord to a suitable wall outlet.
3.3 Connecting multiple fixed dishes using a DiSEqC 1.0 switch
Fig. 6.
1. Connect the LNB’s of your fixed dishes to the inputs of a DiSEqC 1.0 switch
2. Connect the output or “to receiver” connector of the DiSEqC 1.0 switch to the SAT IN
connector on your receiver.
3. Refer to section 3.1 or 3.2 for TV and mains connections.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7805 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info