480571
10
Zoom out
Zoom in
Previous page
1/25
Next page
7
PART 2 • English
English
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at STRONG understand that you can’t wait to enjoy your new HD+ receiver. The following quick guide
will make you familiar with the basic operation of this device. We do, however, advice you to read the full
manual to get the best performance from your STRONG HD+ receiver.
To turn your receiver ON or to Standby, use the STBY button on the remote control or the button on the
left side of the front panel.
If you are using the HDMI connection for your TV set, it might be possible that you need to switch on TV
and select the correct HDMI input first.
Choose the desired channel with the pq buttons and OK or the CH+/CH- buttons. Alternatively, you
can digit the channel number with the 0~9 buttons on the remote control. Or press OK in viewing mode
to display the channel list.
The volume can be adjusted with the VOL+/VOL- buttons.
6.0 OPERATION
In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter 7.0 to get familiar with the menu of your new receiver.
6.1 Changing channels
Your new receiver is equipped with four ways to change channels.
via direct access
via the CH+/CH- buttons.
via the channel list
via selection of channel groups (APS)
Direct access
To gain direct access to a certain channel, simply input its number with the 0~9 buttons on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits is
possible. Just wait a few seconds and your receiver will switch to the selected channel.
Using the CH+/CH- buttons
CH+ or p and OK will switch to a higher channel.
CH- or q and OK will switch a lower channel.
Channel list
Press OK in viewing mode to display the Channel List. Use pq in the Channel List to highlight your
channel of choice and press OK once to select the highlighted channel. Press OK again to leave the
Channel List. The Channel List is equipped with a filter function to make finding your favourite channels
easier. Within the Channel List, press t button to jump to selections on left side of channel list banner.
Here you can select following options: ALL, FAV, A~Z, SAT and APS.
Use pq to select one of these options and press u button to select the list of your choice and OK
to confirm.
You can use the TV/R button within the channel list to toggle between TV and radio channel list/s.
APS Channel list
Your receiver is equipped with new system called “APS” Astra Platform Service which store channels in
separated channel lists on sort, type or group. If you are using the Astra 19.2 satellite and did scan on
HD+ channel scan in installation, then this system is contained in the channel list.
Press OK in viewing mode to display the Channel List. Press t button to select the group of your choice
on the left side of the channel list banner. Select APS with the pq buttons and press the u button
to show the group lists from APS channel system. Select your wanted channel group by pq buttons.
Directly on the right side is displayed which channels belong to this selected group. Press u button to
enter this channel group and select it with the pq buttons. Press OK once to select the highlighted
channel, by another pressing you can switch to viewing mode. The receiver will stay in the selected
channel group until you will select another one.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7805 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info