480571
7
Zoom out
Zoom in
Previous page
1/25
Next page
4
PART 2 • English
2.0 YOUR RECEIVER
2.1 DEFAULT PIN-CODE: 0000
2.2 Front Panel
Fig.1
1. Standby/ON switch Turns the receiver ON or to Standby
2. Navigations buttons Menu navigation
3. 4 digit LED display Displays channel number or time
4. MENU Opens the OSD menu
5. EXIT Exit from menu
6. OK Confirm selection
7. Card reader Slot to insert HD+ card for access of HD+ channels*
2.3 Rear Panel
Fig 2.
1. SAT IN To connect to the LNB of your satellite dish for reception of satellite
broadcast signal
2. COMPONENT To connect to TV or Beemer for high video quality over Y/Pb/Pr
component output
3. VIDEO (RCA) To connect to the RCA video input of your TV or VCR using an
RCA cable
4. AUDIO (L/R) To connect to the audio input of TV, VCR or your HIFI using an
RCA cable
5. TV SCART To connect to TV using a SCART cable
6. HDMI To connect to the HDMI input of your TV using a good quality
HDMI cable.
7. S/PDIF (Opt.) To connect to a digital or home cinema audio amplifier using an
optical cable
8. USB Connect your USB storage device (stick, HDD, etc.) to this port
9. DC POWER To connect to the original included main power adapter (Input
110 – 240 V 50 ~ 60 Hz/ Output 12 V DC) there and connect main
power adapter to the original included power cord.
2.4 Remote Control Unit
Fig. 3.
1. q Turns the receiver ON/Standby
2.
Mutes the audio output of the receiver
3. 0~9 Channel number and numeric value input
4. FAV Opens the favourite group selection
5. OPT Opens the audio and subtitle selection menu
6. TXT Displays the current Teletext of this channel, if available
7. F.LIST Opens the playback list in viewing mode
8. MEDIA Opens the Multimedia menu in viewing mode
9. RECALL Toggles between the two last watched channels
10. GUIDE Displays the EPG (Electronic Program Guide)
11. VOL pq Increasing/decreasing of the volume level
12. PAGE CHpq Switches to next/previous channel in viewing mode or scrolls page
wise in lists
13. INFO Press once to display channel information. Press twice to call extended
program info.
14. RED For Teletext function, in OSD for specific functions.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7805 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info