480572
12
Zoom out
Zoom in
Previous page
1/20
Next page
9
PART 2 • English
English
5.3.2 FIRST TIME INSTALLATION
In this menu you have the possibility to do First Time Installation, which clears all stored channels in the channel list
and all settings in your setup. Then a warning message will be displayed. There select YES if you want to delete or NO to
cancel. After confirming OK to reset receiver, First Time Installation Menu will be displayed. With BACK you can always
cancel actions and exit the actual menu or submenu.
5.3.3 AUTOMATIC SEARCH
This menu allows you to do an auto search at selected satellite. Use the pq for navigation and tu buttons to
change settings.
Satellite Name: Use the
u and pq buttons to select desired satellite and OK to confirm selection.
Search For: Use the
tu buttons to select between TV and Radio, TV Only, Radio Only. The search
process will be made according to the selected channel type.
Scrambled channels: Use the
tu to choose Yes or No. If you select Yes, the scrambled channels will be
included. If you select No, they won’t be searched for. After setting the mode according
your wishes, press OK to start the automatic search process. After finishing the automatic
search, the program list will be updated. If new programs are found, they will be added at
the end of the program list.
5.3.4 MANUAL SEARCH
This menu allows you to manually search for specific channels. With BACK you can always cancel actions and exit the
actual menu or submenu.
Satellite Name: Use the
u and pq buttons to select desired satellite and OK to confirm selection.
Polarization: Use the
tu buttons to select between Horizontal and Vertical.
Frequency: Enter new/changed values with the NUMERIC buttons.
Symbol rate: Enter new/changed values with the NUMERIC buttons.
Modulation Settings: Use
u and pq buttons to change settings from this transponder for
Standard: DVBS, DVBS2 or Auto
Mode: 8PSK, QPSK or Auto (in DVBS not to change)
FEC Rate: from 1/2/ to 9/10 and Auto (according above settings)
Network Search: If this item is set to NO, the receiver will search for the channels available from preset
transponder list of the selected satellite. If this item is set to YES, the receiver will search
additionally for channels from NIT table (NIT= Network Identification Table). Use this
option to get new channels from transponders that appeared on satellite.
PID Entry (for single channel search):
Use
u and pq buttons to select and insert specific data from a single channel as following:
Video PID: Enter new/changed values with the NUMERIC buttons.
Codec: Use
tu to select between MPEG2 and H264.
Audio PID: Enter new/changed values with the NUMERIC buttons.
Format: Use
tu to select between MPEG and AC3.
PCR PID: Enter new/changed values with the NUMERIC buttons.
Search For: Use
tu to select between TV and Radio, TV Only, Radio Only. The search process will be
done according the selected channel type.
Scrambled channels: Use
tu to choose Yes or No. If you select Yes, the scrambled channels will be included.
If you select No, they won’t be searched for. After you have set the mode according your
wishes, press OK to start the manual search process.
5.3.5 LOAD SETTINGS
Here you can reset receiver to load the preset channel table respectively the factory default settings. To perform the
factory default, highlight this item and press OK. Then a warning message will be displayed. Select YES, if you want to
set factory default, select NO to cancel. After confirming with OK, the database and receiver will be reset. With BACK
you can always cancel actions and exit the actual menu or submenu.
5.3.6 SAVE SETTINGS
Use this setting to setup your defined channel and transponder database and other settings as factory default setting.
To save your current settings as factory default, highlight this item and press OK. Then a warning message will be
displayed. Select YES, if you want to perform this action or select NO to cancel. After confirming with OK the database
will be written to the receiver memory. With BACK you can always cancel actions and exit the actual menu or submenu.
WARNING It is recommended to perform first the “Save Settings” function (after you have done all setups and
necessary settings after First Time Installation) before you set receiver to “Load Default” (factory
default), because then you will be able to restore your settings easily in case of any malfunction or
wrong setup.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7500 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info