480574
20
Zoom out
Zoom in
Previous page
1/27
Next page
English
PART 1 • English
17
right channel number by selecting the first letters of the channel´s name in the
pop up window.
When you have entered all parameters, press OK to store your booking.
Edit: Press the GREEN button to edit an existing booking.
Delete: Press the BLUE button to delete a booking from the list. Press OK to confirm
deleting or EXIT to cancel.
NOTE: You can set timers for programmes directly from the EPG. Please refer to section 6.8 for
more details.
7.5 Option
Press MENU and select Option. In this menu you can adjust the OSD Language, Subtitle Language, Audio
Language, Digital Audio mode and Banner Time.
Select an option and press tu to adjust the setting.
Press EXIT to exit the menu.
OSD Language: Select the preferred language for the On Screen Display.
Subtitle Language: Select the preferred subtitle language.
Audio Language: Select the preferred audio language for watching TV channels. If the language
is not available, the default programme language will be used
Digital Audio: Select digital audio output mode. Settings affect both S / PDIF and
HDMI outputs.
PCM – audio from any format will be converted to PCM format
RAW – audio from receiver will be send in original format
RAW (HDMI On)- As RAW, but also affects the HDMI output.
OFF – digital audio output disabled
Banner Time
Set the time-out for the info banner. Possible settings are: 1~10 seconds.
7.6 System Settings
Press MENU and select System. The menu provides options to adjust the system settings.
Press pq to select an option and press tu to adjust the setting. Press EXIT to exit the menu.
Set Password
Set or change the password for locked programmes and menu access. Enter your old password or the
default password '0000'. You will then be asked to enter your new password. To confirm, re-enter your
new password. After confirming, press EXIT to exit the menu.
Restore Factory Default
Reset your receiver to the default factory settings.
Select Restore Factory Default in the main menu and press OK or u to select. Enter your password or the
default password '0000' and press OK to confirm. This option will delete all your channels and settings.
The receiver will reboot and start with the First Installation menu.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7002 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info