480574
25
Zoom out
Zoom in
Previous page
1/27
Next page
PART 1 • English
22
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Please check the receiver according
to the procedures shown below. If the receiver does not work properly after checking it, please contact
your local Service line or STRONG dealer. Alternatively you can send a support mail via our website:
www.strong.tv. NEVER open or disassemble your receiver. This may cause a dangerous situation and will
void the warranty.
Problem Possible cause What to do
The standby indicator does not
light up
Mains lead unplugged/
multipoint connector switched
off.
Check mains lead/switch
multipoint connector on.
Front panel switch is in OFF
position.
Set front panel switch to ON
position.
No picture The receiver can’t receive signal. Check the antenna cable, replace
the cable, or connect the cable to
the receiver tightly.
Incorrect values of some tuner
parameters.
Set the values of tuner
parameters correctly in the
Installation menu.
Wrong direction of the dish. Check signal strength and adjust
your dish correctly.
No picture or sound on TV Input is not selected on your TV. Switch to correct TV input.
TV or VCR is not connected to
main.
Bad cable connection.
Check mains lead.
Firmly plug in cables between
receiver and TV.
Audio muting. Press the MUTE button.
Receiver is switched to DVD/
VCR scart input
Press the DTV/VCR button.
TV power off. Turn TV on.
Scrambled channel
message
Channel is scrambled. Select alternative channel.
No response to remote control Receiver off. Plug in and turn on plug.
Handset not aimed correctly. Aim handset at IR sensor.
IR sensor obstructed. Check for obstructions.
Hand set batteries exhausted. Replace handset batteries.
Password forgotten Contact local Service Hotline or
send email to our support via
www.strong.tv
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7002 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info