480574
17
Zoom out
Zoom in
Previous page
1/27
Next page
PART 1 • English
14
Move Continue: press tu for moving West/East. It will keep moving as long as the button is
hold pressed. By pressing once it will move in 1°step.
Move Step(1): press tu for moving West/East in 0.3° step.
Store Position: to store the current motor position for selected satellite.
Goto Reference: to go to the reference 0° position.
DiSEqC1.3: Select DiSEqC1.3 with the tu buttons. Press GREEN to setup your location
coordinates. A pop-up window will appear, in which the following settings can
be made:
Location: Use tu to select one of the pre-set locations. Choose a location nearest to
you. If you know the coordinates of your place of residence, you can choose
Manual and make the following extra adjustments:
Longitude Direction: Choose East or West.
Longitude Angle: Use the NUMERIC buttons to enter the coordinate.
Lattitude Direction: Choose North or South.
Latitude Angle: Use the NUMERIC buttons to enter the coordinate.
When all settings have been made, press EXIT to save the data and leave the window.
Now press OK to enter the DiSEqC1.3 menu.
Move Auto will move the dish to the selected satellite automatically.
For Move Continue, Move Step (1) and Goto Reference please see explanation above.
7.3.1.3 Channel Scan
Automatic Scan
Single Satellite Scan: Press BLUE for Scan. A window with scan settings will be displayed.
Scan Mode: Use tu to select Default, Blind Scan or NetWork.
Default: All stored transponders in the memory will be scanned.
Blind Scan: Slow scan in 2 MHz steps. The receiver will first scan the whole frequency band
to find the transponders it can lock on. After gathering all transponders, it
scans the transponders one by one to get all available programmes.
NetWork: Network search will be performed – when network information is broadcasted
new transponders will be found and stored.
Crytped: Press tu to select All Channels (scrambled and free) or FTA Channels (free to
air);
Service Type: Press tu to select ALL, DTV or Radio.
After configuring, press OK or BLUE again to start scanning with the selected settings.
Your receiver will now perform an automatic channel search with the scanning progress shown on
screen. During the channel search you can skip transponders by pressing the MENU button, or quit the
scan process with EXIT. When the progress has been completed, all found channels will be stored and
the receiver will switch to the first found channel.
Multi-Satellites Scan: When using a multi feed antenna with more than 1 LNB, select the satellites
your antenna is adjusted to with the OK button. The selected satellites will be
marked by the "
ü“ symbol. Set the appropriate LNB inputs in the DiSEqC point
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7002 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info