480574
7
Zoom out
Zoom in
Previous page
1/27
Next page
PART 1 • English
4
1. Power button: To turn ON/OFF the main power supply
2. Remote control
sensor: Receives the signal from the remote control
3. LED display: Shows channel number in operation and time in Standby
4. Standby indicator: Shows power state of the receiver
Green LED - receiver is turned on
Red LED - receiver is in standby mode
5. USB: For connection of external storage devices
6. Channel up/down: To change channels without using the remote control
2.3 Rear panel
Fig. 2
1. SAT IN To connect to the LNB of your satellite dish for reception of satellite
broadcast signal
2. SAT OUT To loop through the satellite signal to a second receiver
3. S/PDIF To connect to a digital or home cinema audio amplifier
4. HDMI To connect to the HDMI input of your TV using a good quality
HDMI cable.
5. TV SCART To connect to TV using a SCART cable
6. DVD/VCR SCART To connect to a Video or DVD recorder
7. Power cord The receiver requires a mains voltage of 100~240V AC 50~60Hz (auto
selecting). Please check the local power conditions before connecting
the receiver to the mains supply.
2.4 Remote Control
Fig. 3
1. q Turns the receiver ON/Standby
2. ! To turn the sound on or off.
3. EPG Viewing mode: Displays the EPG (Electronic Programme Guide)
4. INFO Press once to display channel number/name and now/next info. Press
twice to display detailed event info and transponder/signal strength
information. Pressing again – back to viewing mode.
5. TTX To open teletext if available on the current channel.
6. AUDIO Displays the audio selection menu with selections for available
languages and audio modes
7. DTV/VCR Switches to VCR input if it is in DTV state. Switches to DTV if it is in
VCR state
8. SUBTITLE To select subtitles language out of available ones on the
current channel
9. MENU To open the main menu in viewing mode or to go one step back in
the menu
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7002 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info