480531
16
Zoom out
Zoom in
Previous page
1/25
Next page
13
PART 1 • English
English
After configuring press OK or BLUE again to start scanning with the selected settings.
Your receiver will now perform an automatic channel search with scan progress shown on screen. During
channel search you can skip Transponders by pressing MENU button, or quit the scan process by EXIT.
Once the process is finished, all found channels will be stored and the receiver will switch to the first
found channel.
Multi-Satellites Scan: When using a multi feed antenna with more than 1 LNB, select the satellites
your antenna is adjusted for by OK button. The selected satellites will be
marked by the symbol “z“. Set in the DiSEqC point the appropriate LNB
numbers and press BLUE for Scan. A window with scanning settings will be
displayed. After configuring the settings like explained in Single Satellite Scan
above, press OK or BLUE again to start Multi-Scan on all selected satellites.
Scanning by transponder (Manual Scan)
Press GOTO for displaying the transponder list of the focused satellite. By pressing GOTO again you
switch back to the satellites list.
Single Transponder Scan: Use pq buttons to highlight the transponder your wish to scan. Press BLUE
for Scan. A window with scanning settings will be displayed. After configuring
the settings (explained in 7.3.1.3 above), press OK or BLUE again to start
scanning on focused transponder. Once the scan process is finished, all found
channels will be stored and the receiver will switch to the first found channel.
Multi-Transponder Scan: Select the transponders you want to scan by OK button. The selected
transponders will be marked by the symbol “z“. Press BLUE for Scan. A
window with scanning settings will be displayed. After configuring the settings
like explained in 7.3.1.2 above, press OK or BLUE again to start Multi-Scan on
all selected transponders.
7.3.1.4 Satellite Edit options
Add satellites: Press RED to add a new satellite. In new opened menu enter the satellite’s
name and position by using Navigation and Numeric buttons. In the appeared
key table select a character by using the navigation buttons. Press OK to
choose the character. Once you finish inputting the new name, navigate to
OK” button on screen and press OK on the remote control to confirm the
new name.
Save the settings with OK or cancel by EXIT.
Edit satellites: Press GREEN to edit the focused satellite. For changing settings see
explanation above. Confirm changes with OK or cancel by EXIT.
Delete satellite: Press YELLOW to delete the focused satellite. Press OK to confirm deleting or
EXIT to cancel it.
7.3.1.5 Transponder Edit options
Add transponder: Press RED to add a new transponder. In new opened menu enter the
transponder´s data by using Navigation and Numeric buttons. Confirm the
settings with OK or cancel by EXIT. An existing TP cannot be stored again
under the same satellite.
Edit transponder: Press GREEN to edit the focused transponder. In new opened menu enter the
new transponder´s data by using Navigation and Numeric buttons. Confirm
changes with OK or cancel by EXIT.
Delete transponder: Press YELLOW to delete the focused transponder. Press OK to confirm deleting
or EXIT to cancel it.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7000 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info