480579
9
Zoom out
Zoom in
Previous page
1/15
Next page
6
PART 1 • English
4.1 Language Selection
Press pq buttons to choose your language, press OK to confirm. In case of German selected, there is an extra option
available of preset antenna configuration with ASTRA 19.2E (LNB1) and HOT BIRD 13.0E (LNB2) through DiSEqC switch. In
Czech the configuration ASTRA 19.2E (LNB1) and ASTRA 23.5E (LNB2) is available.
4.2 Audio Language Selection
Select your preferred Audio language using the pq buttons and press OK to confirm. If you have pressed OK by mistake or
confirmed a wrong setting you can use the GREEN (Back) button to get one step back at every step of Setup Wizard.
4.3 Time Zone adjustment
Select your Time Zone according to the region you live using the pq buttons. For Summertime use the tu buttons to
select the correct setting, then press OK to confirm.
4.4 Satellite configuration
Select one of the available connection types: Fixed dish, DiSEqC1.2 or GOTO X Settings, using the pq buttons, according to
your used dish installation. Depending on the selected Installation you will be guided to different Setup steps.
4.4.1 Fixed dish
Now you have the possibility to install your channels from the connected Antenna/s. For manually installation select Search
Channel with the pq buttons in case you are connected to single dish and want to setup e.g. ASTRA 19.2E or HOT BIRD
13E. In this case you are guided to Antenna Setting/s and have to setup your Satellite manually, for details refer to chapter
5.1.1 Antenna Setting/s.
Select mySAT if you have connected a single dish or multiplexed dishes and want to install automatically. Select RED (Single
Dish) or YELLOW (Multiple Dish). Now the receiver starts process to detect the correct satellite/s. Oncenished your receiver
shows the found satellite/s & you can execute a channel search on it/ them with RED to Scan ALL channels or GREEN to Scan
Free channels.
4.4.2 DiSEqC 1.2
You are now guided directly to menu Antenna Setting/s >Motor setup which gives you the possibility to point the dish to
correct position. Use the pq and tu buttons to select and change the settings, for details refer to chapter 5.1.1 Antenna
Setting/s under point GOTO X.
4.4.3 GOTO X Settings
If you have selected this configuration, then you need to select your country from the list using the pq buttons. If your
country is not available you have to choose User define where you can insert the correct position for your longitude angle and
direction, latitude angle and direction and the rotating speed.
5.0 MAIN MENU
All the important settings and features of your receiver can be operated in Main Menu. The Main Menu consists of following
sub-menus: Installation”,Program setting”, “User Preference”,System Settingand “Utility”.
Press MENU buttons in no-menu state to enter MAIN MENU.
5.1 Installation
The installation menu contains following sub-menus: Antenna Setting/s”, “Edit Satellite data”,Remove Satellite”,Satellites
search”,Manual TP Searchand “mySAT Search”.
5.1.1 Antenna setting/s
Press OK button to enter Antenna Setting/s menu.
Satellite: Here is therst pre-stored satellite shown. Use the u button and pq buttons to select another satellite from the
list, press OK to confirm.
Transponder: If you change the satellite, the transponder table will be changed automatically. Use the u button and
pq buttons to select a transponder from the corresponding satellite, press OK to confirm.
LNB frequency: Default configuration is set to Universal, if another LNB is used set the frequency accordingly to the used
LNB or define yourself > User define.
22 kHz: This configuration is preset to Auto, because this is the most usual setting for Universal LNB’s, in case
your LNB requires another setting you can switch it permanently ON or OFF by using the tu buttons.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 6511 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 6511 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info