480579
7
Zoom out
Zoom in
Previous page
1/15
Next page
4
PART 1 • English
NOTE: The batteries should not be recharged, disassembled, electrically short-circuited or be mixed or used
with other types of batteries. If rechargeable accumulators instead of batteries are going to be used, we
recommend using (e.g. NiMH) types with low self-discharge to ensure long time operation of remote
control.
2.0 YOUR RECEIVER
2.1 Front Panel
Figure 1
1. Power To put the receiver in and out of standby mode.
2. Menu Used to display the main menu.
3. OK To show TV/Radio channel list and to select a program, highlight a line.
4. CH pq Channel up & down.
5. VOL tu Volume up & down.
6. Lock LED Signal Indicator
7. Power LED Power indicator
8. Display Shows channel number, boot/loader message and time in standby mode.
2.2 Rear Panel
Figure 2
1. SAT IN To connect the coaxial cable from your LNB on the satellite dish to this connector.
2. SAT OUT Gives you the possibility to connect an extra satellite receiver (analogue or digital).
3. RS-232 Serial Port This serial port can be used to connect your PC to your receiver to download new
software versions to your receiver
4. AUDIO Right and Left Give you the possibility to connect the audio signal to an external amplifier, or the
audio input of your TV.
5. VIDEO This connector has a constant video signal for additional VCR-connections.
6. S/PDIF Use the coaxial output to connect your receiver to the input of your digital audio
amplifier.
7. TV SCART To connect your receiver to your TV using a SCART cable.
8. DVD/VCR SCART To connect your receiver to your DVD or Video recorder using a SCART cable.
9. ON/OFF Power Switch
10. Power Cord Your receiver requires a current of 100 ~ 240 V AC (Auto-selectable), 50 / 60 Hz ± 5 %.
Make sure to check the power specification before connecting your receiver to the wall
outlet.
2.3 Remote Control Unit (RCU)
Figure 11
1. STANDBY/ON: To switch the receiver ON or to Standby.
2. SAT To show the scanned satellite list.
3. MUTE To turn the sound ON/OFF.
4. NUMERIC KEYS (0~9) To insert numbers.
5. RECALL To switch to previously watched channel.
6. TV/RADIO To switch between TV and RADIO.
7. MENU To activate main menu.
8. EPG (Electronic Program Guide) To show the TV/Radio program guide.
9. FAV To get favorite channel list you set before.
10. EXIT To exit current menu or for cancellation.
11. OK To confirm the highlighted menu item.
12. tu: To change volume in viewing mode.
13. pq: To change program.
14. VOL+/- To change volume
15. PAGE pq Page up/down in menu.
16. AUDIO To select or change the Audio language.
17. PAUSE To freeze the picture.
18. ZOOM Zoom function.
19. i To show the current channel information.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 6511 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 6511 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info