750857
19
Zoom out
Zoom in
Previous page
1/25
Next page
When all settings have been made, use pq to highlight Save and press OK to confirm. To quit the timer without
saving your settings, highlight Cancel.
7.3.5 Parental Lock
This menu allows you to protect the installation menu and/or channels with a PIN code. You can also enter a new PIN
code in the Parental Lock menu.
Use p/q to select Parental Lock from the System Setup menu and press OK to proceed. You will be asked to enter your
PIN code. (DEFAULT PIN: 1234)
Menu Lock: Locks the installation menu. You can set Menu Lock to On or Off.
Parental Rating: Choose between: Off, 10 years and up to 18 years. Channels with a parental rating above the
chosen age will be protected with a PIN code (if rating is available in your local broadcast).
New Password: Enter your new PIN code (4 digits) here.
Confirm Password: Re-enter your PIN code here to confirm.
7.3.6 OSD Setting
This menu allows you to change settings for: OSD Timeout and OSD Transparency.
OSD Timeout: Sets the duration time of on screen banners and messages remove. The range is 1~10 seconds
or Always On.
OSD Transparency: To set the OSD transparency from Off ~ 40% with 10% steps.
7.3.7 Audio Description
Audio Description is a service, which some broadcasters are supporting to describe the content on screen for the
visually impaired people. Select AD Service On and Use AD as default also On to activate the service. With AD Volume
Offset the level of the AD text can be adjusted.
NOTE Availability of Audio Description depends on the broadcast.
7.3.8 Auto Standby
Auto Standby is a new feature that helps you reducing power consumption. When set to 3, 4 or 5 hours, the receiver
will switch to standby if it doesn’t receive any commands during this time. Set Auto Standby to Off to deactivate the
automatic standby function.
Default is 3 hours.
7.4 Tools
Press MENU in viewing mode to enter the Main Menu.
Select the Tools submenu with p/q and press OK or u to enter.
Use p/q to highlight the submenu of choice and press OK proceed.
Press to leave.
7.4.1 Information
This submenu shows receiver specific information such as hardware version and software version. Please open the
Information screen when you call our hotline. The person who answers your call might ask for the information given in
this screen.
7.4.2 Load Factory Settings
This option allows you to reset the receiver to factory settings, which clear all stored channels.
Warning! By resetting your receiver to factory default, all your settings and stored channels will be
permanently deleted. Please use this option with care.
15
English
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 3002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 3002 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 3002

Strong SRT 3002 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info