750857
17
Zoom out
Zoom in
Previous page
1/25
Next page
7.2.2 Auto Scan
Use p/q to select Installation and press OK or u to advance.
Select Auto Scan with p/q and press OK to enter.
Select your country and network.
Use p/q to highlight Search. Now press OK to start auto scan.
The receiver will store all found channels in the channel list.
NOTE: Network ID (NID) and other technical data can be found on the website of your “Provider”
(Broadcaster, cable network/your local cable system) usually. Start a Network search from
there to find all channels belonging to the network.
7.2.3 Network ID scan
Select Network ID scan and press OK to enter the Network ID scan menu. Press pq t u to set Frequency, Symbol Rate,
Scan QAM and Network ID. Obtain technical data about your cable provider's base channel and Network ID from your
provider and start a Network ID scan from there to find all channels belonging to the network corresponding to the
Network ID. Highlight Search and press OK to start the search. Network ID (NID) and other technical data can be found
on the website of your “Provider” (Broadcaster, cable network/your local cable system) usually. Start a Network search
from there to find all channels belonging to the network.
7.2.4 LCN (Logical Channel Numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the provider, channels will be stored
in a provider defined order. Set LCN to On to activate provider defined channel numbering or Off to store channels in
found order. This function only applies when a new channel search is performed.
7.2.5 Free/All channels.
If Free is selected, only “Free-to-air” channels are stored.
If [All} is selected, scrambled channels will also be stored.
NOTE: Only Free channels can be watched with this unit.
7.3 System Setup
This menu allows you to manage the system settings of your receiver. It consists of the following sub-menus: Language,
TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting, Audio Description Setting and Auto Standby.
Press p/q to highlight the menu of choice and press OK advance to the next screen. Use p/q to move the highlight
to the setting of choice. Values can be changed with tu. Press to leave.
7.3.1 Language
This menu allows you to set up your language preferences.
Language: Use tu to select the language for the On Screen Display.
First Audio: Use tu to select Audio language.
Second Audio: Use tu to select a language that will be played when the language selected at First Audio isn’t
available.
Subtitle Display: Use tu to select the use of subtitle Normal, Hard of Hearing or Off.
Subtitle Language : Use tu to select the preferred subtitle language.
2nd Subtitle Language: Use tu to select the preferred 2nd subtitle language if the 1st preference is not available.
Teletext: Use tu to select the preferred Teletext language (when available).
*Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If subtitles are not supported, they might be activated via Teletext if
available.
13
English
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 3002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 3002 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 3002

Strong SRT 3002 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info