750857
18
Zoom out
Zoom in
Previous page
1/25
Next page
7.3.2 TV System
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution: Use this option to select the video resolution of your TV screen. The options are: By Source
(automatic detection of video resolution offered to the receiver), By Native TV (automatic
detection of maximal resolution of TV screen), and manual selections 480i, 576i up to 1080p.
Please use a setting that matches the specifications of your TV. After a selection is made, you
will be asked to confirm. Selection above 576i is only applicable on HDMI output.
Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred conversion method.
The options are: Auto (automatic detection of aspect ratio), 4:3PS (Panscan) (Displays 16:9
widescreen broadcasts full screen on your 4:3 TV), 4:3LB (letterbox) (black bars on top and
under the picture on a 4:3 TV) and 16:9 (use this setting for 16:9 TV sets).
Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital audio will be
converted to stereo audio. Bitstream enables you to listen or transfer Dolby® Digital/Dolby®
Digital Plus* audio to the TV via HDMI or to a Home entertainment system (for example)
through coaxial S/PDIF.
NOTE: Dolby® Digital Plus* is only available on the HDMI output.
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
7.3.3 Local Time Setting
Here you can set up your region and time zone.
Region: Use tu to select the region you live in.
GMT Usage: Set to By Region for broadcaster defined time, User Define to select manual a GMT zone or to Off
to input time and date manually.
GMT Offset: Allows you to adjust your time zone. This option is only available when GMT Usage is set to User
Define.The GMT Offset range is "-11:30 ~ +12:00", increasing by half hours progressively. The
cities matching the set GMT Offset are displayed at the bottom of the screen.
Summer time: Select On to add one hour for summer time.
Date: Date and Time settings are available only when GMT Usage is set to Off. Use the 0~9 buttons to
enter the date. Press to proceed.
Time: Date and Time settings are available only when GMT Usage is set to Off. Use the 0~9 buttons to
enter the time. Press to proceed.
7.3.4 Timer Setting
This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use pq to select Timer Setting from the System Setup menu and press OK to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you wish to set with
pq and press OK to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode: Choose between Off the timer is inactive, Once, Daily (the timer will be executed every day,
same time) or Weekly (the timer will be executed every week, same day, same time) and
Monthly (the timer will be executed every month, same day, same time).
Timer Service: Choose between Channel (the timer will wake up the receiver) or Record (Timer will start
recording the scheduled event).
Wakeup Channel: Use t u or OK to call up channel list, therein use pq or P+/P and press OK again to select
the channel the timer should switch to or record on.
Wakeup Date: Use the 0~9 buttons to enter the date for the timed event.
On time: Use the 0~9 buttons to enter the starting time.
Duration: Use the 0~9 buttons to enter the duration of the timer.
14
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 3002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 3002 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 3002

Strong SRT 3002 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info