813456
30
Zoom out
Zoom in
Previous page
1/40
Next page
30
Maintenance & Servicing
5b. Hinge Blocks on Firebox
To adjust the Hinge Blocks on the Firebox:
5b.1 Use a 5mm Hex Key to loosen the screws, see Diagram 3.
This allows front to back adjustment to allow the seal
between the door and firebox to be improved, if required.
3
Screws
5b.2 Once the desired position has been achieved ensure the
screws are firmly tightened.
6. Adjusting the Door Catch
To adjust the Door Catch:
6.1 Open the door to gain access to the catch.
If the door cannot be opened with the handle/ multifunctional
tool, pull the door with one hand and carefully insert a small
flat head screwdriver into the slot in the door catch slider,
see Diagram 4.
Dome Catch
Screwdriver
Appliance
Door
Appliance
Body
Door Catch Slider
4
Lift the door catch slider until it disengages from the dome
catch and the door opens.
6.2 Use a 13mm A/F spanner to loosen the half lock nuts either
side of the box section in the appliance body.
This will allow the dome catch to rotate in and out,
see Diagram 5.
DO NOT undo the catch more than 3-4mm.
Half Lock
Nuts
Dome
Catch
Box Section
Appliance Body
5
6.3 Ensure the dome catch is in an upright position with the flat
sides parallel with the side of the appliance, see Diagram 6.
Dome Catch
Door Catch Slider
Side of Appliance
6
When the door closes the Dome Catch should sit centrally in
the slot of the door catch slider.
6.4 Adjust the height of the catch so that the door locking
mechanism makes contact slightly above the point of the
Dome Catch, see Diagrams 7, 8 & 9.
7
Dome
Catch
Point of
Dome
Appliance
Body
Positioning the catch
too low will not allow
the locking mechanism
to slide over the Dome
and fasten securely
in place
Locking
Mechanism
Door
Casting
Incorrect Position - Dome catch too low
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax Riva Vision - Wood Freestanding Stove at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax Riva Vision - Wood Freestanding Stove in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info