813456
20
Zoom out
Zoom in
Previous page
1/40
Next page
20
Installation Instructions
England and Wales – Document J / Scotland -
Part F/Document J (Republic of Ireland only)
the latest edition of BS 8303, BS EN 15287,
BS 7566
1. Installing the Appliance
Each installation is unique to the property so it is not possible
to give details to suit every setting. The installation must comply
with Building Regulations and be made using "best practice"
construction methods.
Many fireplace openings have a supporting lintel. Do not remove
without supporting the remaining structure of the building. Do not
support the structure with the appliance or the flue system.
1.1 Take care when installing the appliance. Careless
handling and use of tools can damage the finish and/or
area.
1.2 If the appliance is to be installed with an optional decorative
plinth, it needs to be fitted prior to installation, see Section 4.
Smoke Control Kit
This appliance is supplied with a pre-tted smoke
control kit and has been independently tested to
PD6434 making it exempt from the controls that
generally apply in Smoke Control Areas.
THE SMOKE CONTROL KIT IS SUPPLIED
DISABLED AND MUST THEREFORE BE MODIFIED
BEFORE INSTALLATION IN ORDER FOR THE
APPLIANCE TO MEET THE REQUIREMENTS OF A
SMOKE CONTROL AREA AND MUST BE OPERATED
CORRECTLY TO MINIMISE THE AMOUNT OF
SMOKE PRODUCED.
This appliance is suitable for use in a Smoke
Control Area when burning wood and following the
instructions for use specied in this manual but
ONLY if the Smoke Control kit has been enabled.
If this appliance is installed outside of a Smoke
Control Area then the Smoke Control kit can be
disabled to give more control over the lower burn
rates.
Any modifications to the kit should only be done by
a suitably qualified installer and MUST be done at
the time of installation, see Installation Section 6.
1.3 Select and fit the required flue option.
1.4 The Riva Vision must be secured to the hearth using
the fixing points provided. Failure to do so may result in
damage to the appliance.
If mechanical fixing is not possible Stovax recommend
the use of a back stop or semi-fixing the appliance using
silicone sealant applied to the inside edges of the base.
1.5 Position the appliance where required on the hearth and mark
the location of the fixing holes in the mounting bracket.
1.6 Drill the required sized holes into the hearth.
1.7 Use suitable fasteners to fix in place.
Fixing holes in
hearth mount
1
2. Top Flue Installation
2.1 The appliance is factory supplied with a top flue outlet but
the flue collar and blanking plate require sealing with Fire
Cement before use, see Diagram 2.
Flue Collar
Decorative
Flue Ring Fire Cement
sealed all around
Fire
Cement
sealed all
around
Blanking
Plate
2
Flue Collar Inner
2.2 To fit the pipe to the collar:
— Lift appliance into position.
Take care not to damage the hearth finish.
— If a glass top is to be fitted this must be done prior to
connecting the flue, see Section 5.
— Connect appliance to the chimney using flue pipe.
— Seal the connecting joints.
3
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax Riva Vision - Wood Freestanding Stove at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax Riva Vision - Wood Freestanding Stove in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info