813456
22
Zoom out
Zoom in
Previous page
1/40
Next page
22
Installation Instructions
3.3 First remove the deflector plate.
— Use a 13mm A/F spanner/socket to remove 1 M8 half
nut from each of the front two studs. The flanged spacer
will drop down.
— Remove a further M8 nut from each front stud,
see Diagram 8, Detail A Front.
Appliance Top
Appliance Top
Flue Collar
Flue Collar
Flue Collar
Deflector Plate
Deflector Plate
Blanking Plate
Deflector Plate
M8 Half Nut
Flanged
Spacer
Flanged
Spacer
M8 Nut
M8 Nut
M8 Half Nut
M8 Half Nut
M8 Nut
Detail A Front
Detail B Back
Detail B
Detail A
8
Stove top
Decorative Flue Ring
M8 Nut
M8x15 Hex
Head Screw
M8 Nut
Stove
Back
Flue
Collar
Flanged
Spacer
M8 Half Nut
M8 Half Nut
Deflector Plate
Blanking Plate
9
— Remove 1 M8 nut from each of the rear studs using a
13mm A/F spanner/socket.
The deflector plate will drop down inside the appliance,
see Diagram 8, Detail B Back.
3.4 Remove the blanking plate using a 13mm A/F Spanner/
Socket wrench to take off the 4 M8 half nuts from the inside
back plate of the appliance. Withdraw the blanking plate
from inside and remove the 4 M8x15 Hex head screws from
the back of the appliance.
3.5 To remove the flue collar remove the 4 M8 nuts front and
back. The collar will then drop down inside the appliance.
3.6 Fitting the flue collar and blanking plate for rear flue:
— Fit the blanking plate to the top flue outlet using
4 M8 nuts.
— Seal to the firebox using fire cement, see Diagram 3.
— Slide the deflector plate through the 4 studs on the
underside of the appliance top.
— Line up with the flue hole and secure in position using 2
M8 nuts onto the 2 front studs (reverse of removal).
— Fit the flue collar to the rear flue outlet using the 4 bolts
and half nuts from the cover plate.
— Seal to the firebox using fire cement, see Diagram 2.
— Secure the deflector plate in position by fitting the two M8
Nuts onto the rear studs.
— Slide the flanged spacers over the two front studs and
secure tightly using 2 M8 half nuts.
— Re-install 2 upper rear side bricks.
— Re-install upper and rear baffle.
— Fit the decorative flue cover over the flue hole.
Note: Upper rear central brick is not fitted if the
appliance is configured for Rear Flue option
3.7 The following flue pipe is available to ensure safe
installation:
5" Tee Stovax Product Code 4516
6" Tee Stovax Product Code 4616
5" 135o Bend Stovax Product Code 4512
6" 135o Bend Stovax Product Code 4512
5" Flue Pipe x 612mm long Stovax Product Code 4501
6" Flue Pipe x 612mm Long Stovax Product Code 4601
Self-tapping screw
( 1 side only )
Tee with cap
Cap
Seal collar with
fire cement
All models
10
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax Riva Vision - Wood Freestanding Stove at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax Riva Vision - Wood Freestanding Stove in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info