813456
18
Zoom out
Zoom in
Previous page
1/40
Next page
18
Pre-Installation Instructions
1. General
1.1 To make the installation of the appliance easier it is best
to remove the internal components before fitting into the
builders opening/studwork.
PACKING LIST
User & Installer Instructions
Warranty card
Pair leather gloves
Blanking Plate
Flue Ring
Operating Tool
STANDARD FEATURES
Primary air
Airwash (for wood burning / clean glass).
Factory set Secondary air (to ensure complete burning of
flue gases)
Top or rear flue exit option
1.2 For the best results removing the following components as
set out below.
2. Removal of the Log Guard
2.1 To remove the Log guard:
— Lift Log Guard clear of the supporting brackets.
— Rotate to clear the sides of the door opening.
Do not use appliance without the log guard in position.
1
3. Removal of the Baffles
No tools are required.
3.1 To maintain efficient combustion the appliance is fitted with a
twin baffle system, consisting of an upper and lower baffle.
3.2 First remove the Log Guard from the appliance to give
access to the firebox.
Upper Baffle
Lower Baffle
2
3.3 Remove the Lower Baffle, see Diagram 3, by lifting the
front edge slots from the support bars on the appliance
sides.
Support
Bar
Lower Baffle
slots
Lower
Baffle
Baffle Rear
Edge location
Lower Baffle
3
Pull the baffle forward to disengage the rear edge from
the location above the secondary air holes.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax Riva Vision - Wood Freestanding Stove at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax Riva Vision - Wood Freestanding Stove in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info