52169
11
Zoom out
Zoom in
Previous page
1/106
Next page
10
English / USA
MS 191 T
To reduce this risk, always engage the
chain brake before starting. Never
attempt to start the chainsaw when the
guide bar is in a cut or kerf. When you
pull the starter grip, do not wrap the
starting rope around your hands. Do not
allow the grip to snap back, but guide the
starter rope slowly back to permit the
rope to rewind properly. Failure to follow
this procedure may result in injury to
hand or fingers and may damage the
starter mechanism.
Important adjustments
!Warning!
To reduce the risk of personal injury from
loss of control or contact with the
running chain, do not use a saw with
incorrect idle adjustment. At correct idle
speed, the chain should not rotate. For
directions to adjust idle speed, see the
appropriate section of your owner's
manual . If you cannot set the correct
idle speed, have your STIHL dealer
check your saw and make proper
adjustments or repairs.
!Warning!
Proper tension of the chain is extremely
important. In order to avoid improper
setting, the tensioning procedure must
be followed as described in your
manual. Always make sure the
hexagonal nut(s) for the sprocket cover
is (are) tightened securely after
tensioning the chain. Never start the saw
with the sprocket cover loose.
Check chain tension once more after
having tightened the nut(s) and
thereafter at regular intervals (whenever
the saw is shut off). If the chain becomes
loose while cutting, shut off the engine
and then tighten. Never try to tighten the
chain while the engine is running! After
adjusting a chain, start the saw, let the
engine run for a while, then switch
engine off and recheck chain tension.
Working Conditions
!Warning!
The chainsaw produces
poisonous exhaust gases
as soon as the engine
starts. These gases may
be odorless and invisible. Operate your
chainsaw outdoors only in a well
ventilated area.
To reduce the risk of serious or fatal
injury from inhaling such poisonous
gases, never work indoors or in
enclosed spaces since you may inhale
poisonous fumes.
!Warning!
Use of this product (including
sharpening the saw chain) can generate
dust, mists and fumes containing
chemicals known to cause respiratory
disease, cancer, birth defects, or other
reproductive harm. If you are unfamiliar
with the risks associated with the
particular dust, mist or fume at issue,
consult your employer, governmental
agencies such as OSHA and NIOSH
and other sources on hazardous
materials. California and some other
authorities, for instance, have published
lists of substances known to cause
cancer, reproductive toxicity, etc.
Control dust (such as sawdust), mists
(such as oil mist from chain lubrication)
and fumes at the source where possible.
In this regard use good work practices
and follow the recommendations of
OSHA / NIOSH and occupational and
trade associations.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS191T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS191T in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info