52169
13
Zoom out
Zoom in
Previous page
1/106
Next page
12
English / USA
MS 191 T
The use of climbing aids, such as spikes
or climbing irons, also require special
training. Always secure the chainsaw
with a rope (tie to hinged ring) and attach
it to the lifeline. Cordon off the work area
in order to reduce the risk of injuries and
damage to bystander or property (e.g.
motor vehicles) property from falling
branches.
!Warning!
To reduce risk of
electrocution, take extra
precautions when cutting
near power lines. Have
the power switched off
before starting cutting
work in the immediate vicinity of power
lines.
Cutting Instructions
Always hold the saw firmly with both
hands when the engine is running. Place
your left hand on the front handle bar
and your right hand on rear handle and
throttle trigger. Left-handers should
follow these instructions too. Wrap your
fingers tightly around the handles,
keeping the handles cradled between
your thumb and forefinger. With your
hands in this position, you can best
oppose and absorb the push, pull and
kickback forces of your saw without
losing control (see section on reactive
forces). Make sure your chainsaw
handles and grip are in good condition
and free of moisture, pitch, oil or grease.
!Warning!
To reduce the risk
of serious or fatal
injury to the
operator or
bystanders, never
use the saw with one hand.
You cannot control reactive forces and
you may lose control of the saw, which
can result, e.g., in the bar and chains
kating or bouncing along the limb or log.
This rule against one handed operation
applies also for those compact saws
designed for use in confined spaces.
Position the chainsaw in such a way that
your body is clear of the cutting attach-
ment whenever the engine is running.
Stand to the left of the plane of the
cutting attachment.
!Warning!
Do not operate your chainsaw with the
starting throttle lock engaged. Cutting
with the starting throttle lock engaged
does not permit the operator proper
control of the saw or chain speed. Begin
cutting with the saw at full throttle,
engage the bumper spike firmly in the
wood (if possible) and then continue
cutting. Always work with the bumper
spike so that you have better control of
the saw. If you work without the bumper
spike saw may pull you forwards
suddenly.
001BA081 KN
001BA082 KN
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS191T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS191T in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info