537132
57
Zoom out
Zoom in
Previous page
1/122
Next page
56 MS 240, MS 260, MS 260 C
9.5 Flywheel
Remove the carburetor box
cover.
Remove the shroud, b 8.4
Block the piston with the locking
strip (1) 0000 893 5903, b 6
: Unscrew the flywheel nut (arrow).
1
165RA011 TG
165RA192 TG
: Screw the puller (1) 1110 890
4500 clockwise into the flywheel
as far as stop.
: Use 24 mm open end wrench (3)
to hold the puller steady and
screw home the thrust bolt (2)
until the flywheel is released from
the crankshaft.
Remove the puller (1) 1110 890
4500 from the flywheel.
The flywheel and magnet poles
(arrows) must not be damaged or
have turned blue. Replace flywheel
if necessary.
On versions with handle heating,
also check the magnet ring for signs
of damage, b 15.7.
The flywheel and crankshaft stub
must be free from grease before
assembly.
165RA193 TG
1
23
165RA194 TG
Check the key (1) and replace if
necessary
Make sure the key (arrow) is
properly seated.
Degrease the crankshaft stub and
bore in flywheel with a standard
solvent-based degreasant
containing no chlorinated or
halogenated hydrocarbons.
: Make sure the key engages the
slot (arrow) in the flywheel.
Set the air gap between the
ignition module and flywheel,
b 9.2.1
Reassemble all other parts in the
reverse sequence.
Tightening torques, b 3.5
165RA195 TG
1
165RA196 TG
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info