537132
56
Zoom out
Zoom in
Previous page
1/122
Next page
55MS 240, MS 260, MS 260 C
9.4 Spark Plug Boot / Ignition
Lead
Remove the ignition module,
b 9.2.1
: Pull the grommet (1) off the high
voltge output (arrow).
Unscrew the ignition lead (2) from
the contact pin and pull it out of
the high voltage output.
Pull the grommet (1) off the
ignition lead.
: Use suitable pliers to pull the leg
spring out of the spark plug boot.
Unhook the leg spring from the
ignition lead.
Pull the boot off the ignition lead.
165RA481 TG
1
2
165RA187 TG
Cut a new ignition lead to the
specified length, see parts list.
Use a pointed tool to pierce the
center of the new ignition lead’s
insulation, about 15 mm from the
end of the lead.
: Pinch the hook of the leg spring
into the center of the lead (arrow).
Coat the inside of the spark plug
boot with STIHL
press fluid, b 17
: Hold the ignition lead and leg
spring together and push them
into the spark plug boot.
165RA188 TG165RA189 TG
: Make sure the leg spring (arrow)
locates properly inside the spark
plug boot.
: Use a pointed tool to pierce the
center of the other end of the
ignition lead which screws into
the module.
Fit the grommet.
Do not use either graphite grease or
silicone insulating paste.
Install the ignition module and set
the air gap between the module
and flywheel, b 9.2.1
Reassemble all other parts in the
reverse sequence.
165RA190 TG165RA191 TG
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info