537132
49
Zoom out
Zoom in
Previous page
1/122
Next page
48 MS 240, MS 260, MS 260 C
8.7.2 Installing
: Pull out the needle cage (1),
check it and replace if necessary.
Lubricate the needle cage (1)
with oil and push it into the
connecting rod.
Install the snap ring in the piston
boss at the clutch side
– the assembly drift
1110 893 4700 can be pushed
through the installed snap ring.
Line up the piston so that the
arrow on the piston crown points
toward the exhaust port/muffler.
Place the piston on the
connecting rod.
: Push the assembly drift (1)
1110 893 4700, small diameter
first, through the piston and small
end (needle cage) and line up the
piston.
165RA149 TG
1
165RA150 TG
1
Lubricate the piston pin with oil.
: Fit the piston pin (1) on the
assembly drift (2) and slide it into
the piston.
The piston has a snap ring at both
sides. The snap ring at the clutch
side must be installed first.
: Remove the sleeve (1) from the
installing tool 5910 890 2210.
: Attach the snap ring (1) to the
magnet (2) so that the snap ring
gap is on the flat side of the tool's
shank (arrow).
165RA151 TG
21
165RA152 TG
1
2
165RA153 TG
1
2
: Push the large slotted diameter of
the sleeve over the magnet and
snap ring.
The inner pin must point towards
the flat face of the tool's shank.
: Press the installing tool
downwards into the sleeve until
the magnet butts against the end
of the guide slot.
Use a suitable base.
165RA154 TG
165RA155 TG
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info