537132
47
Zoom out
Zoom in
Previous page
1/122
Next page
46 MS 240, MS 260, MS 260 C
Ignition side of crankcase
: Use a suitable punch to carefully
drive out the oil seal.
: Check and clean the crankcase
or replace if necessary.
If this half of the crankcase is in
order, install a new ball bearing.
Heat the area of the bearing seat
to about 150 °C (300 °F).
The bearing (1) drops out as soon
as this temperature is reached.
165RA137 TG
165RA138 TG
1
165RA139 TG
Heat the area of the bearing seat
to about 150 °C (300 °F).
Position the ball bearing so that
its open side (balls visible) face
the outside of the crankcase.
: Push the ball bearing home as far
as stop.
This operation must be carried out
quickly because the bearing
absorbs heat and begins to expand.
Check that the bearing is properly
seated and, if necessary, use the
press arbor 1120 893 7200 to press
it fully into the bearing seat.
Clutch side of crankcase
: Use a suitable punch to carefully
drive out the oil seal.
165RA140 TG
165RA141 TG
: Check and clean the crankcase
or replace if necessary.
If this half of the crankcase is in
order, install a new ball bearing.
Heat the area of the bearing seat
to about 150 °C (300 °F).
The bearing (1) drops out as soon
as this temperature is reached.
As the clutch side of the crankcase
does not have a fixed bearing seat,
the oil pump must be installed
before the ball bearing – the oil
pump then serves as the stop.
Install the oil pump,
adjustable, b 13.5,
non-adjustable, b 13.4
165RA142 TG
165RA143 TG
1
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info