537132
48
Zoom out
Zoom in
Previous page
1/122
Next page
47MS 240, MS 260, MS 260 C
Heat the area of the bearing seat
to about 150 °C (300 °F).
Position the ball bearing so that
the centering ring (arrow) points
toward the oil pump.
: Push the ball bearing home as far
as stop (oil pump).
This operation must be carried out
quickly because the bearing
absorbs heat and begins to expand.
Check that the ball bearing is
properly seated and,
if necessary, use press arbor
1118 893 7200 to press it home
against the oil pump – too much
pressure may damage the oil pump.
Remove the adjustable oil pump,
b 13.5
Remove the non-adjustable oil
pump, b 13.4
Install the crankshaft, b 8.6.1
Install the oil seals,
b 8.3
Reassemble all other parts in the
reverse sequence.
Tightening torques, b 3.5
165RA480 TG
8.7 Piston
8.7.1 Removal
Before removing the cylinder,
decide whether or not the
crankshaft has to be removed as
well, b 8.6
Remove the cylinder, b 8.5
Note when removing the snap rings
that the installing tool 5910 890
2210 can only be applied to the
igniton side – the snap ring at the
clutch side must be installed first.
: Pry both hookless snap rings out
of their grooves by applying a
suitable tool to the recess
(arrow).
: Place the assembly drift (1)
1110 893 4700 in position.
165RA145 TG
165RA146 TG
1
: Use the assembly drift (2)
1110 893 4700 to push the piston
pin (1) out of the piston.
If the piston pin (1) is stuck, release
it by tapping the end of the drift (2)
lightly with a hammer.
Hold the piston steady during this
process to ensure that no jolts are
transmitted to the connecting rod.
: Remove the piston (1) from the
connecting rod.
Inspect the piston rings and
replace if necessary, b 8.8
165RA147 TG
1
2
165RA148 TG
1
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info