537132
42
Zoom out
Zoom in
Previous page
1/122
Next page
41MS 240, MS 260, MS 260 C
: Use a 4 mm diameter drift to drive
out the cylindrical pin at the chain
tensioner side.
: The tensioner slide (1) must butt
against the thrust pad (arrow).
Back off the spindle (1) in service
tool until it is clear of the
crankshaft stub.
: Push the service tool (2)
5910 890 2205 over the collar
screws, fit the nuts (arrows) and
tighten them firmly.
165RA117 TG
165RA078 TG
1
165RA478 TG
2
1
Versions with Quick Chain
Tensioner
: Push the service tool (1)
5910 890 2205 over the collar
screw, fit the nut and tighten it
firmly.
: Turn the spindle (2) clockwise
until the crankshaft stub is
pushed out of the ball bearing.
This operation releases the clutch
side of the crankcase and separates
the two halves.
Install new ball bearings and oil
seals, b 8.6.2 and b 8.3
: Remove the gasket (1).
165RA479 TG
1
2
165RA120 TG
1
Removing – ignition side
Use the tools in the service tool set
5910 007 2200 for removing and
installing.
Unscrew the spindle (1) of
service tool 5910 890 2220 until
the drilled plate (2) butts against
the crankcase – left-hand thread.
: Fit the plate (2) 5910 893 2102
against the ignition side of the
crankcase so that the number
"16" (arrow) is at the bottom.
: Insert three M5x72 screws (3) in
the holes marked "16" and
tighten them down against the
drilled plate.
: Turn the spindle (1)
counterclockiwse until the
crankshaft is pushed out of the
ignition side of the crankcase.
16
16
16
16
165RA121 TG
2
1
3
16
16
16
16
165RA122 TG
1
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info