537132
44
Zoom out
Zoom in
Previous page
1/122
Next page
43MS 240, MS 260, MS 260 C
: Position the screw sleeve (2) on
the crankshaft thread and screw
it into place.
Turn the spindle (1) until the
drilled plate butts against the
ignition side of the crankcase.
: Secure the drilled plate 5910 893
2102 in position by inserting three
M5x72 screws (arrow) in the
holes marked "16", then turn the
spindle (1) clockwise.
Install the ignition side of the
crankcase as far as stop.
165RA126 TG
2
1
16
16
16
16
165RA127 TG
1
The crankshaft turns when it is
being pulled into place with the
service tool. Therefore, make sure
the small end of the connecting rod
always points upward to the
cylinder.
Remove the service tool.
: Fit a new gasket (1) and locate it
on the pin (arrow).
165RA128 TG
165RA129 TG
1
Installing – clutch side
Take care not to damage the
crankshaft stub.
Inspect and clean the sealing faces
on the clutch side of the crankcase
(including the cylinder sealing face)
– the sealing faces must not be
damaged in any way.
: Fit two M5x72 screws (arrows) in
the holes at the ignition side
– to act as guides and prevent
twisting.
Coat straight stub of crankshaft
with oil.
: Make sure the pin (1) engages
the hole and the gasket is not
pinched or twisted.
165RA130 TG
165RA132 TG
1
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info