537132
38
Zoom out
Zoom in
Previous page
1/122
Next page
37MS 240, MS 260, MS 260 C
: Pull the insulator (1) off the
slotted nut (2).
Check the individual parts and
replace if necessary.
Reassemble in the reverse
sequence.
: Push the slotted nut (1) with
insulator into the bore until it
engages in position.
Inspect the reflector foil (1) and
replace it if it is damaged.
165RA005 TG
2
1
165RA456 TG
1
165RA457 TG
1
Versions with decompression
valve
: Bond the new reflector foil in
position along the ribs (arrows).
Check the cap (1), if fitted, and
replace if necessary
If a new shroud is fitted, the cap (1)
must be removed.
: Fit the shroud (1). Push the lugs
(2) into the holes (arrows).
Make sure the stud is located
against the slotted nut.
Screw home the slotted nut as far
as stop.
Reassemble all other parts in the
reverse sequence.
165RA008 TG
1
1
165RA025 TG
2
8.5 Cylinder
Before removing the piston, decide
whether or not the crankshaft has to
be removed as well.
Cylinder installed
To remove the flywheel and clutch,
the.crankshaft has to be blocked by
inserting the locking strip in the
spark plug hole.
Cylinder removed
To remove the flywheel and clutch,
the crankshaft has to be blocked by
resting the piston on the wooden
assembly block.
Remove the shroud, b 8.4
Pull off the boot and unscrew the
spark plug, b 6
Remove the fan housing,
b 10.2
Remove the carburetor, b 14.2
Push the manifold out of the tank
housing,
b 14.6.1
Remove the muffler, b 8.1
Remove the decompression
valve, b 8.9
Remove the handlebar, b 11.5.
On versions with handle heating,
take out the screws and swing
the handlebar to one side,
b 11.6
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info